Novice question - determining resistor power rating requirements

General Tech Discussion - Anything amp-ish goes!

Moderators: CurtissRobin, colossal, zaphod_phil, Daviedawg, Graydon

Post Reply
cstenger5
Newbie
Newbie
Posts: 74
Joined: Mon 09/06/21 11:44 am

Novice question - determining resistor power rating requirements

Post by cstenger5 »

This question is both practical for me and something I'd like to understand in general.
Practical: I have some decent 1/2 watt resistors and want to know if they're underrated for the circuit, since I typically use 1 watt where these would be.
General: What are the general rules or tendencies for power ratings for resistors in an amp circuit?
0 x
Chris Stenger
Stenger Guitars
https://www.instagram.com/stengerguitars/

cstenger5
Newbie
Newbie
Posts: 74
Joined: Mon 09/06/21 11:44 am

Re: Novice question - determining resistor power rating requirements

Post by cstenger5 »

Something I found:
---------------------------
Here's a quick 'n dirty guide for 5W-25W amps:
First and second power supply dropping/filter resistors - 5W
All other dropping/filter resistors - 3W
Power tube cathode - 5W if separate, or 10W if shared by more than one tube.
Power tube screen grid - 1W
Everything else - 1/2W
----------------------------------
1 x
Chris Stenger
Stenger Guitars
https://www.instagram.com/stengerguitars/

User avatar
JMPGuitars
Super Duper Admin
Super Duper Admin
Posts: 3954
Joined: Tue 09/18/12 8:00 pm
Location: South Central, MA
Contact:

Re: Novice question - determining resistor power rating requirements

Post by JMPGuitars »

cstenger5 wrote:
Thu 12/02/21 9:56 am
Something I found:
---------------------------
Here's a quick 'n dirty guide for 5W-25W amps:
First and second power supply dropping/filter resistors - 5W
All other dropping/filter resistors - 3W
Power tube cathode - 5W if separate, or 10W if shared by more than one tube.
Power tube screen grid - 1W
Everything else - 1/2W
----------------------------------
That guide is typical, but personally I use 1W wherever possible for the "everything else" stuff. Sometimes I can only get resistors in 1/2W, and it really doesn't matter for those spots because it would be in a low voltage/low current section. That's what you pay attention to- a lot of 1/2W have lower voltage handling, like 250V or so. The 1W CMF resistors I use can all handle at least 500V, so I don't have to pay too much attention in these circuits.
2 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright

Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info


Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale

cstenger5
Newbie
Newbie
Posts: 74
Joined: Mon 09/06/21 11:44 am

Re: Novice question - determining resistor power rating requirements

Post by cstenger5 »

Thanks Josh!
1 x
Chris Stenger
Stenger Guitars
https://www.instagram.com/stengerguitars/

Post Reply