Master volume drop
Moderators: JMPGuitars, Daviedawg, Graydon, CurtissRobin, colossal, zaphod_phil
-
- Unrated
- Posts: 2
- Joined: Mon 12/29/14 4:22 am
Master volume drop
Hello all, been lurking around for a long time, this is my first question.
What I have is: 12AX7 anode to 47N/400V cap to 1meg master volume to 5k6 grid stopper to 6L6 grid.
The master volume works right up until about 8, but then the volume drops a little instead of going up more and stays that way. The pot seems to be OK checking with a multimeter.
Any ideas? Thanks in advance.
What I have is: 12AX7 anode to 47N/400V cap to 1meg master volume to 5k6 grid stopper to 6L6 grid.
The master volume works right up until about 8, but then the volume drops a little instead of going up more and stays that way. The pot seems to be OK checking with a multimeter.
Any ideas? Thanks in advance.
0 x
- Bieworm
- Verbose Moderator
- Posts: 2405
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: Master volume drop
A schematic of the amp and on how you wired it would be convenient.lentzell wrote: ↑Sun 03/06/22 3:55 pmHello all, been lurking around for a long time, this is my first question.
What I have is: 12AX7 anode to 47N/400V cap to 1meg master volume to 5k6 grid stopper to 6L6 grid.
The master volume works right up until about 8, but then the volume drops a little instead of going up more and stays that way. The pot seems to be OK checking with a multimeter.
Any ideas? Thanks in advance.
1 x
"THIS should be played at high volume..preferably in a residential area"
- JMPGuitars
- Super Duper Admin
- Posts: 4072
- Joined: Tue 09/18/12 8:00 pm
- Location: South Central, MA
- Contact:
Re: Master volume drop
Did you check with a multimeter in or out of circuit? Do you see a resistance change after 8?
0 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
-
- Unrated
- Posts: 2
- Joined: Mon 12/29/14 4:22 am
Re: Master volume drop
Thanks to both of you. I actually solved the problem (without finding out the cause) by adding a 82K resistor at the top of the potentiometer, so the wiper never reaches full power, if that makes any sense.
I measured resistance at the point when the volume dropped and it was around 220K from the wiper to the top (the "1" lug), so I started with that and the problem went away: the full range of the pot is usable. But then gradually reduced the value of this resistor and it still worked. I stopped at 82K, I guess there's no point in making even smaller though I believe it would still work.
So that's that. Mind you, I'm not a newbie (well, I am a bit regarding tube amps) as I've been an electronics engineer for more than 40 years. Always learning.
Again, thanks. English is not my main language, you may have guessed.
I measured resistance at the point when the volume dropped and it was around 220K from the wiper to the top (the "1" lug), so I started with that and the problem went away: the full range of the pot is usable. But then gradually reduced the value of this resistor and it still worked. I stopped at 82K, I guess there's no point in making even smaller though I believe it would still work.
So that's that. Mind you, I'm not a newbie (well, I am a bit regarding tube amps) as I've been an electronics engineer for more than 40 years. Always learning.
Again, thanks. English is not my main language, you may have guessed.
0 x
- Bieworm
- Verbose Moderator
- Posts: 2405
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: Master volume drop
'Might' be solved... but you might also have a hidden oscillation going on, which can damage the output transformer. Always solve problems at the source..
0 x
"THIS should be played at high volume..preferably in a residential area"