JTM45 split cathode switch
Moderators: JMPGuitars, Daviedawg, Graydon, CurtissRobin, colossal, zaphod_phil
-
- Newbie
- Posts: 38
- Joined: Sat 07/10/21 6:58 am
JTM45 split cathode switch
I remember seeing a schematic for a switch doing that but can't seem to find it anymore.
Does anyon here know where I can get that ?
( a schematic for switch between split cathodes with plexi bypass values and original spec... )
I aasume doing that AND a tube / SS rectifier switch would result in pretty much two amps in one box...
Does anyon here know where I can get that ?
( a schematic for switch between split cathodes with plexi bypass values and original spec... )
I aasume doing that AND a tube / SS rectifier switch would result in pretty much two amps in one box...
0 x
-
- Newbie
- Posts: 38
- Joined: Sat 07/10/21 6:58 am
- Bieworm
- Verbose Moderator
- Posts: 2428
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: JTM45 split cathode switch
Its not that hard to figure out. If you study fat switches and such maybe things become more clear. Which values exactly are you trying to achieve? Draw out the 2 scenarios and start puzzling... that's more satisfying for you.. post your ideas then to let us check them out.
0 x
"THIS should be played at high volume..preferably in a residential area"