JTM45 split cathode switch

Forum to discuss amp circuits besides the 18 Watters and their ilk.

Moderators: JMPGuitars, CurtissRobin, colossal, zaphod_phil, Daviedawg, Graydon

Post Reply
Hebaton
Newbie
Newbie
Posts: 37
Joined: Sat 07/10/21 6:58 am

JTM45 split cathode switch

Post by Hebaton »

I remember seeing a schematic for a switch doing that but can't seem to find it anymore.
Does anyon here know where I can get that ?
( a schematic for switch between split cathodes with plexi bypass values and original spec... )
I aasume doing that AND a tube / SS rectifier switch would result in pretty much two amps in one box...
0 x

Hebaton
Newbie
Newbie
Posts: 37
Joined: Sat 07/10/21 6:58 am

Re: JTM45 split cathode switch

Post by Hebaton »

Really nobody can tel me how to do this ?
0 x

User avatar
Bieworm
Verbose Wizard of Oz
Verbose Wizard of Oz
Posts: 1941
Joined: Mon 02/10/20 8:24 am
Location: Belgium

Re: JTM45 split cathode switch

Post by Bieworm »

Its not that hard to figure out. If you study fat switches and such maybe things become more clear. Which values exactly are you trying to achieve? Draw out the 2 scenarios and start puzzling... that's more satisfying for you.. post your ideas then to let us check them out.🤘
0 x
"THIS should be played at high volume..preferably in a residential area"

Post Reply