18W Turbochamp

Forum to discuss amp circuits besides the 18 Watters and their ilk.

Moderators: JMPGuitars, Daviedawg, Graydon, CurtissRobin, colossal, zaphod_phil

Post Reply
User avatar
crgfrench
Frequent poster
Frequent poster
Posts: 819
Joined: Fri 04/27/18 3:02 am

18W Turbochamp

Post by crgfrench »

“That’s not 18 Watts.”
Uhh, but it is …err, eighteen Watts?
Two days ago I became obsessed with ECL86 tubes - the ones used in the Marshall model 1930 Popular. So over the weekend I focused on nothing but this new design. It’s a 2-tube, single ended, class A, 18 Watt amp to be built in a 5F1 chassis in a tweed 1x10 combo with a Celestion G10 Gold speaker. I’ve spec’d it with MM iron but it can be built with Heyboer, Edcor, Hammond or whatever. My new little “Turbochamp”. Now, finding the time to actually build it…
Screen Shot 2022-09-27 at 10.51.59 AM.png
Screen Shot 2022-09-27 at 10.50.21 AM.png
You do not have the required permissions to view the files attached to this post.
Last edited by crgfrench on Tue 09/27/22 2:27 pm, edited 1 time in total.
3 x

User avatar
Bieworm
Verbose Wizard of Oz
Verbose Wizard of Oz
Posts: 1849
Joined: Mon 02/10/20 8:24 am
Location: Belgium

Re: 18W Turbochamp

Post by Bieworm »

Sounds pretty cool 👍👍
3 x
"THIS should be played at high volume..preferably in a residential area"

User avatar
crgfrench
Frequent poster
Frequent poster
Posts: 819
Joined: Fri 04/27/18 3:02 am

Re: 18W Turbochamp

Post by crgfrench »

Looking through the RCA tube manual, it appears that this will be around 8 or 9 Watts output power, not 18 Watts. I was mistakenly originally referring to the plate dissipation rather than the power output.
0 x

Daviedawg
Superior Amp Tech
Superior Amp Tech
Posts: 711
Joined: Fri 01/08/10 2:00 am
Location: Scotland

Re: 18W Turbochamp

Post by Daviedawg »

ECL86s have a hifi cachet so are a bit pricy. I have used PCL86s which have 13v heaters which I ran at 12v for convenience. They cost a third as much a few years ago.
Dd
1 x

User avatar
crgfrench
Frequent poster
Frequent poster
Posts: 819
Joined: Fri 04/27/18 3:02 am

Re: 18W Turbochamp

Post by crgfrench »

Update, the schem & layout I posted are missing a filter cap, here are the updated dox and some pix of the circuit on a stock 5F1 eyeletboard.
821D63EB-F7EA-434D-91B2-4F70FCD75EE3.jpeg
07B010B7-F9B9-48C4-A4EF-EDA185A849A5.jpeg
D4B35EFD-A2AE-4102-888C-AD402DFD3865.png
C5CE8957-3ECD-4DBB-BC6F-E319551C3B57.png
You do not have the required permissions to view the files attached to this post.
2 x

User avatar
crgfrench
Frequent poster
Frequent poster
Posts: 819
Joined: Fri 04/27/18 3:02 am

Re: 18W Turbochamp

Post by crgfrench »

It’s fitting nicely into a stock 5F1 chassis, with just a few slight mods.
You do not have the required permissions to view the files attached to this post.
2 x

User avatar
crgfrench
Frequent poster
Frequent poster
Posts: 819
Joined: Fri 04/27/18 3:02 am

Re: 18W Turbochamp

Post by crgfrench »

Here's how to build it using EL84s and a 12AX7,
sorry about the low-rez images:
Screen Shot 2022-11-04 at 9.09.10 PM.png
Screen Shot 2022-11-04 at 9.08.47 PM.png
You do not have the required permissions to view the files attached to this post.
1 x

Post Reply