18W Fuse Holder
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
-
- Unrated
- Posts: 8
- Joined: Sat 04/18/20 10:53 am
18W Fuse Holder
What do you all use for a fuse holder in your 18W build?
I have one of the VHT chassis I'm finally getting around to building, and after opening up the holes to use CTS pots, I realize the fuse holders I've been using, (mostly Fender types), are way too small. I look online and see Marshall type "snap-in" that are billed as fitting a 5/8" hole. The chassis hole is ,605 with a notch, I'm just wondering if the "snap-in" bracket has enough "give" to fit?
Thanks for your help!
I have one of the VHT chassis I'm finally getting around to building, and after opening up the holes to use CTS pots, I realize the fuse holders I've been using, (mostly Fender types), are way too small. I look online and see Marshall type "snap-in" that are billed as fitting a 5/8" hole. The chassis hole is ,605 with a notch, I'm just wondering if the "snap-in" bracket has enough "give" to fit?
Thanks for your help!
0 x
- foreverstrung
- Occasional poster
- Posts: 241
- Joined: Sun 10/10/21 5:53 pm
- Location: Seabrook Texas
- Contact:
Re: 18W Fuse Holder
I just posed a not too dissimilar question in another thread.
I'm interested in knowing more about this too
I'm interested in knowing more about this too
0 x
- JMPGuitars
- Super Duper Admin
- Posts: 3969
- Joined: Tue 09/18/12 8:00 pm
- Location: South Central, MA
- Contact:
Re: 18W Fuse Holder
I use combo IEC inlets that include a fuse housing built in.
Here's one I use sometimes: https://www.mouser.com/ProductDetail/562-719W-00-02
I also use this filtered type: https://www.mouser.com/ProductDetail/631-FN9260-10-06
For a basic standalone fuse, I've used this (this one is too small for a 5/8 hole though): https://www.mouser.com/ProductDetail/693-3101.0215
I've also used the standard Marshall style from amp part suppliers. For example: https://www.amplifiedparts.com/products ... l-14-fuses
The dimensions for this one are likely what you need Joe: Thanks,
Josh
Here's one I use sometimes: https://www.mouser.com/ProductDetail/562-719W-00-02
I also use this filtered type: https://www.mouser.com/ProductDetail/631-FN9260-10-06
For a basic standalone fuse, I've used this (this one is too small for a 5/8 hole though): https://www.mouser.com/ProductDetail/693-3101.0215
I've also used the standard Marshall style from amp part suppliers. For example: https://www.amplifiedparts.com/products ... l-14-fuses
The dimensions for this one are likely what you need Joe: Thanks,
Josh
You do not have the required permissions to view the files attached to this post.
1 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
-
- Unrated
- Posts: 8
- Joined: Sat 04/18/20 10:53 am
Re: 18W Fuse Holder
Thanks, Josh, that was the one I was looking at!
Just went through my parts today, everything I have is too big, or small.
I appreciate the help!
Just went through my parts today, everything I have is too big, or small.
I appreciate the help!
1 x