2x10 combo

Seeing and hearing is believing

Moderators: CurtissRobin, colossal, zaphod_phil, Daviedawg, Graydon

Daviedawg
Superior Amp Tech
Superior Amp Tech
Posts: 748
Joined: Fri 01/08/10 2:00 am
Location: Scotland

Re: 2x10 combo

Post by Daviedawg »

Watched this video and recalled this conversation. Interest is that Marshall created an oversize ported 1x12 for the lead and bass 20. But little is known about it.

Dd
https://www.youtube.com/watch?v=FVbvS85MyO0

PS You get an internal of cab and amp later in the video
0 x

chaliapin
Occasional poster
Occasional poster
Posts: 301
Joined: Tue 03/05/13 5:28 pm

Re: 2x10 combo

Post by chaliapin »

https://www.ampmaker.com/speaker-lead-and-bass-1x12/

There's a copy of it. It's big isn't it!
0 x

User avatar
Graydon
Admin, Charter Member
Admin, Charter Member
Posts: 1619
Joined: Fri 01/31/03 2:00 am
Location: USA
Contact:

Re: 2x10 combo

Post by Graydon »

I agree with Josh above - WGS makes some great drivers. I'd try their 10" offerings.
I used a pair of Celestion 10s that had been tweaked and branded by Matchless for my first 18w clone. They still sound great these many years later.
In my little 1-10 combo I used a Jensen 10" Mod speaker. They were super cheap and they offered two versions so I got one of each and tried them both. They both sounded good but one had better bottom end. I built the 1-10 combo cabinet to be as resonant as possible and it worked. That little 1-10 is a monster. It is loud, aggressive and has a pretty good bottom end for such a small box and speaker. I would not hesitate to use this little 1-10 18W combo on a gig.
3 x
Sincerely,
Graydon Stuckey
www.gdsamps.com
www.guytron.com

chaliapin
Occasional poster
Occasional poster
Posts: 301
Joined: Tue 03/05/13 5:28 pm

Re: 2x10 combo

Post by chaliapin »

Thanks graydon,

What were your considerations for making it as resonant as possible?
0 x

User avatar
Graydon
Admin, Charter Member
Admin, Charter Member
Posts: 1619
Joined: Fri 01/31/03 2:00 am
Location: USA
Contact:

Re: 2x10 combo

Post by Graydon »

I did a few things.

1. The chassis has an angled front panel and the speaker baffle is attached directly to the chassis at the top. It attaches to the cabinet at the bottom and in between on the sides, there is no support in the middle. The baffle is free to vibrate much like a tweed Fender baffle. Being attached to the chassis provides a direct path for mechanical feedback.
2. The baffle is made from 1/4" plywood so its fairly light and flexible
3. The rest of the cabinet is made from 1/2" solid pine so it also is very light and resonant.
4. There is no tolex to damp it - just raw wood finish, stained black.
1 x
Sincerely,
Graydon Stuckey
www.gdsamps.com
www.guytron.com

User avatar
JMPGuitars
Super Duper Admin
Super Duper Admin
Posts: 3955
Joined: Tue 09/18/12 8:00 pm
Location: South Central, MA
Contact:

Re: 2x10 combo

Post by JMPGuitars »

Graydon wrote:
Tue 03/28/23 11:55 am
I did a few things.

1. The chassis has an angled front panel and the speaker baffle is attached directly to the chassis at the top. It attaches to the cabinet at the bottom and in between on the sides, there is no support in the middle. The baffle is free to vibrate much like a tweed Fender baffle. Being attached to the chassis provides a direct path for mechanical feedback.
2. The baffle is made from 1/4" plywood so its fairly light and flexible
3. The rest of the cabinet is made from 1/2" solid pine so it also is very light and resonant.
4. There is no tolex to damp it - just raw wood finish, stained black.
😲 geez, casually dropping F-bombs like that... 😉
0 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright

Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info


Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale

chaliapin
Occasional poster
Occasional poster
Posts: 301
Joined: Tue 03/05/13 5:28 pm

Re: 2x10 combo

Post by chaliapin »

Graydon wrote:I did a few things.

1. The chassis has an angled front panel and the speaker baffle is attached directly to the chassis at the top. It attaches to the cabinet at the bottom and in between on the sides, there is no support in the middle. The baffle is free to vibrate much like a tweed Fender baffle. Being attached to the chassis provides a direct path for mechanical feedback.
2. The baffle is made from 1/4" plywood so its fairly light and flexible
3. The rest of the cabinet is made from 1/2" solid pine so it also is very light and resonant.
4. There is no tolex to damp it - just raw wood finish, stained black.
Great info thanks

Sent from my SM-J600FN using Tapatalk

0 x

Post Reply