Volume drops

Forum to discuss amp circuits besides the 18 Watters and their ilk.

Moderators: JMPGuitars, Daviedawg, Graydon, CurtissRobin, colossal, zaphod_phil

Post Reply
User avatar
Hiwatt5
Unrated
Posts: 12
Joined: Fri 03/26/10 2:00 am
Location: Nashville

Volume drops

Post by Hiwatt5 »

I just built a 5F2A amp and I'm getting volume loss at different points on the volume control as I turn it up. At 0-1 there is no sound, then 1-4ish there is sound, then it drops out again, then comes back, etc. as the volume control is wound up. Any suggestions for troubleshooting?
0 x

User avatar
Bieworm
Verbose Moderator
Verbose Moderator
Posts: 2405
Joined: Mon 02/10/20 8:24 am
Location: Belgium

Re: Volume drops

Post by Bieworm »

Hiwatt5 wrote:
Tue 03/07/23 11:14 am
I just built a 5F2A amp and I'm getting volume loss at different points on the volume control as I turn it up. At 0-1 there is no sound, then 1-4ish there is sound, then it drops out again, then comes back, etc. as the volume control is wound up. Any suggestions for troubleshooting?
Did you solder anything to the back of the pots? The carbon strip is easily damaged when overheating while soldering
1 x
"THIS should be played at high volume..preferably in a residential area"

User avatar
Hiwatt5
Unrated
Posts: 12
Joined: Fri 03/26/10 2:00 am
Location: Nashville

Re: Volume drops

Post by Hiwatt5 »

I did. I'll check the pots.

Thanks,
0 x

Post Reply