Tremolo TMB SE build!!!

Forum to discuss amp circuits besides the 18 Watters and their ilk.

Moderators: JMPGuitars, Daviedawg, Graydon, CurtissRobin, colossal, zaphod_phil

User avatar
Bieworm
Verbose Moderator
Verbose Moderator
Posts: 2423
Joined: Mon 02/10/20 8:24 am
Location: Belgium

Re: Tremolo TMB SE build!!!

Post by Bieworm »

JMPGuitars wrote:
Mon 03/06/23 4:17 pm
Bieworm wrote:
Mon 03/06/23 3:27 pm
Here’s a clip with the BF reverb. This is soooo nice… less drive on this tele though.. but you get the idea

https://youtu.be/GTJ8-E9c5I4
I dunno what it is, but that tele has a poorly defined low end. How are the pickup heights?
I know you never liked that tele… I really like the woody lo-fi of it. I’ll do a demo with the humbuckers … just for you!
But in the end it’s turning out to be a really nice amp. I changed some parts since the demo. Filter caps 50uf-choke-50uf (node A=plate) -1k + 47uf (node B=screen) - 2k7 + 22uf (node C=preamp)
On the reverb recovery there’s now 1k5/4.7uf kathode and the re-amp after the recovery is only 1k5 unbypassed.. works best for me on BF verbs
1 x
"THIS should be played at high volume..preferably in a residential area"

User avatar
JMPGuitars
Super Duper Admin
Super Duper Admin
Posts: 4126
Joined: Tue 09/18/12 8:00 pm
Location: South Central, MA
Contact:

Re: Tremolo TMB SE build!!!

Post by JMPGuitars »

Bieworm wrote:
Mon 03/06/23 4:35 pm
JMPGuitars wrote:
Mon 03/06/23 4:17 pm
Bieworm wrote:
Mon 03/06/23 3:27 pm
Here’s a clip with the BF reverb. This is soooo nice… less drive on this tele though.. but you get the idea

https://youtu.be/GTJ8-E9c5I4
I dunno what it is, but that tele has a poorly defined low end. How are the pickup heights?
I know you never liked that tele… I really like the woody lo-fi of it. I’ll do a demo with the humbuckers … just for you!
But in the end it’s turning out to be a really nice amp. I changed some parts since the demo. Filter caps 50uf-choke-50uf (node A=plate) -1k + 47uf (node B=screen) - 2k7 + 22uf (node C=preamp)
On the reverb recovery there’s now 1k5/4.7uf kathode and the re-amp after the recovery is only 1k5 unbypassed.. works best for me on BF verbs
Post an accurate schematic when you're done. 😉😉
1 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright

Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info


Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale

User avatar
Bieworm
Verbose Moderator
Verbose Moderator
Posts: 2423
Joined: Mon 02/10/20 8:24 am
Location: Belgium

Re: Tremolo TMB SE build!!!

Post by Bieworm »

JMPGuitars wrote:
Mon 03/06/23 6:55 pm
Bieworm wrote:
Mon 03/06/23 4:35 pm
JMPGuitars wrote:
Mon 03/06/23 4:17 pm


I dunno what it is, but that tele has a poorly defined low end. How are the pickup heights?
I know you never liked that tele… I really like the woody lo-fi of it. I’ll do a demo with the humbuckers … just for you!
But in the end it’s turning out to be a really nice amp. I changed some parts since the demo. Filter caps 50uf-choke-50uf (node A=plate) -1k + 47uf (node B=screen) - 2k7 + 22uf (node C=preamp)
On the reverb recovery there’s now 1k5/4.7uf kathode and the re-amp after the recovery is only 1k5 unbypassed.. works best for me on BF verbs
Post an accurate schematic when you're done. 😉😉
Yeah... here's what I've got until now. I forgot to add a grid leak resistor on the EL34.. will add that later this evening.
schematic execution with BF reverb 20230307.png
You do not have the required permissions to view the files attached to this post.
1 x
"THIS should be played at high volume..preferably in a residential area"

User avatar
Bieworm
Verbose Moderator
Verbose Moderator
Posts: 2423
Joined: Mon 02/10/20 8:24 am
Location: Belgium

Re: Tremolo TMB SE build!!!

Post by Bieworm »

Did some more fine tuning. Didn’t Split the D nodes but put them in series.
A to B= choke, with A unused
B to C= 1k, B is plate connection
C to D1= 4k7, C is G2 connection and reverb driver plates
D1 to D2= 1k5, D1 is preamp V1 and 2, D2 is reverb recovery and re-amplifier wet/dry

Did a comparison between 6L6GC Tungsol and EL34 Telefunken. The EL34 is definitely a winner! And the reverb sounds amazing! There is only slight hum which is negligible for a SE amp. The reverb only hums when in surf territory. Definitely a keeper, this one!
In case I would build another I will rearrange the layout a bit more ideal, but all in all it’s pretty ok.
D0822DD5-501D-4BB6-8D57-52789AB044EC.jpeg
41DAC5BA-AB3B-4728-A06F-B0A69A637430.jpeg
You do not have the required permissions to view the files attached to this post.
0 x
"THIS should be played at high volume..preferably in a residential area"

User avatar
Bieworm
Verbose Moderator
Verbose Moderator
Posts: 2423
Joined: Mon 02/10/20 8:24 am
Location: Belgium

Re: Tremolo TMB SE build!!!

Post by Bieworm »

Slowly finishing that amp.gave it a pretty kinky 80’s look.
4452F0D1-ACB4-4C5D-8A1C-FB98082F2899.jpeg
692F0489-FE44-4631-816D-82EECE2D854C.jpeg
You do not have the required permissions to view the files attached to this post.
1 x
"THIS should be played at high volume..preferably in a residential area"

chaliapin
Occasional poster
Occasional poster
Posts: 302
Joined: Tue 03/05/13 5:28 pm

Re: Tremolo TMB SE build!!!

Post by chaliapin »

Looking nice, you leaving the back completely open? Which model speaker is it?
0 x

User avatar
Bieworm
Verbose Moderator
Verbose Moderator
Posts: 2423
Joined: Mon 02/10/20 8:24 am
Location: Belgium

Re: Tremolo TMB SE build!!!

Post by Bieworm »

chaliapin wrote:
Mon 03/13/23 5:48 pm
Looking nice, you leaving the back completely open? Which model speaker is it?
Hahaha… no, the backplates are cut, but I have to tolex them
Speaker is a celestion G12H30 55Hz heritage
0 x
"THIS should be played at high volume..preferably in a residential area"

User avatar
Bieworm
Verbose Moderator
Verbose Moderator
Posts: 2423
Joined: Mon 02/10/20 8:24 am
Location: Belgium

Re: Tremolo TMB SE build!!!

Post by Bieworm »

Naaaaa… the more I looked at it, the less I liked it with that 80’s look. Changed the grill and it’s much better imho…
7C17EAEC-6A7C-46EB-BB80-FD0803511756.jpeg
80CF4E4D-F9A1-4CF2-BF32-7B43C12E977E.jpeg
You do not have the required permissions to view the files attached to this post.
2 x
"THIS should be played at high volume..preferably in a residential area"

chaliapin
Occasional poster
Occasional poster
Posts: 302
Joined: Tue 03/05/13 5:28 pm

Re: Tremolo TMB SE build!!!

Post by chaliapin »

Where did you end up with the b+ and dissipation?
0 x

User avatar
Bieworm
Verbose Moderator
Verbose Moderator
Posts: 2423
Joined: Mon 02/10/20 8:24 am
Location: Belgium

Re: Tremolo TMB SE build!!!

Post by Bieworm »

chaliapin wrote:
Tue 03/28/23 4:03 am
Where did you end up with the b+ and dissipation?
Here’s my final chart: 82% with the EL34. I can safely sub it for the 6L6 and get 69%
455955A7-97E8-4845-B615-53CBA0CF0E7C.jpeg
You do not have the required permissions to view the files attached to this post.
0 x
"THIS should be played at high volume..preferably in a residential area"

User avatar
Bieworm
Verbose Moderator
Verbose Moderator
Posts: 2423
Joined: Mon 02/10/20 8:24 am
Location: Belgium

Re: Tremolo TMB SE build!!!

Post by Bieworm »

It’s a friggin’ great amp. Took it to practice last week… nice!! It’s got that woody/boxy tone that is sorta like a little tweed champ, but with tighter overdrive. Not really fat, but honky… me like!!! :D
2 x
"THIS should be played at high volume..preferably in a residential area"

chaliapin
Occasional poster
Occasional poster
Posts: 302
Joined: Tue 03/05/13 5:28 pm

Re: Tremolo TMB SE build!!!

Post by chaliapin »

Sounds like my sort of thing...

Did you try bias up to 100% as it's single ended/ class A?
0 x

User avatar
Bieworm
Verbose Moderator
Verbose Moderator
Posts: 2423
Joined: Mon 02/10/20 8:24 am
Location: Belgium

Re: Tremolo TMB SE build!!!

Post by Bieworm »

chaliapin wrote:
Wed 03/29/23 2:55 pm
Sounds like my sort of thing...

Did you try bias up to 100% as it's single ended/ class A?
No.. it’s an old 70’s telefunken EL34. Don’t wanna risk it… and it sounds fine as is
1 x
"THIS should be played at high volume..preferably in a residential area"

User avatar
TriodeLuvr
Frequent poster
Frequent poster
Posts: 639
Joined: Tue 10/16/18 11:19 am

Re: Tremolo TMB SE build!!!

Post by TriodeLuvr »

That's a beautiful amplifier! Wish I had your skill with cabinetry. I'm not surprised you prefer the EL34 - it has much higher transconductance (gain) than the 6L6, so it should be somewhat louder. I have all the parts to build several SE 6BQ5/6V6 amps, and this schematic might be my go-to for those. They'll be somewhat simpler than that last push-pull amp I built.

Jack
1 x

User avatar
Bieworm
Verbose Moderator
Verbose Moderator
Posts: 2423
Joined: Mon 02/10/20 8:24 am
Location: Belgium

Re: Tremolo TMB SE build!!!

Post by Bieworm »

TriodeLuvr wrote:
Sun 04/02/23 1:15 am
That's a beautiful amplifier! Wish I had your skill with cabinetry. I'm not surprised you prefer the EL34 - it has much higher transconductance (gain) than the 6L6, so it should be somewhat louder. I have all the parts to build several SE 6BQ5/6V6 amps, and this schematic might be my go-to for those. They'll be somewhat simpler than that last push-pull amp I built.

Jack
That would make it a Tremolo TMB champ👍👍👍
The irony of it all is that the underpowered honky tone makes it a super cool little amp, while back when we were kids we all had an amp like that and didn’t like it. We wanted that big sounding amp we couldn’t afford😁
1 x
"THIS should be played at high volume..preferably in a residential area"

User avatar
Bieworm
Verbose Moderator
Verbose Moderator
Posts: 2423
Joined: Mon 02/10/20 8:24 am
Location: Belgium

Re: Tremolo TMB SE build!!!

Post by Bieworm »

Hear this MTF*KR!!!

https://youtu.be/r6fPLGMKiTA
1 x
"THIS should be played at high volume..preferably in a residential area"

garakin
Unrated
Posts: 4
Joined: Mon 04/06/20 12:47 pm

Re: Tremolo TMB SE build!!!

Post by garakin »

Very nice work and sounds awesome! I've found that if I'm going to do an SE amp, I always seem to gravitate to 6V6's or EL-34s. Something about those two tubes that just have a super pleasing distortion.
1 x

Post Reply