Donations
Modulus Amps Marshbar
Moderators: CurtissRobin, colossal, zaphod_phil, Daviedawg, Graydon
-
SpeedTrip
- Unrated
- Posts: 13
- Joined: Sat 03/02/24 10:43 am
Re: Modulus Amps Marshbar
Yep first one for a long time. Im struggling with which glue to use so im open to suggestions
0 x
-
Bieworm
- Verbose Moderator
- Posts: 2450
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: Modulus Amps Marshbar
I use the tolex glue from TubeTown. Almost any contact glue will do, but some are more forgiving than others.
0 x
"THIS should be played at high volume..preferably in a residential area"
-
SpeedTrip
- Unrated
- Posts: 13
- Joined: Sat 03/02/24 10:43 am
Re: Modulus Amps Marshbar
Modulus recommended 3m fastbond 30nf. Good stuff and it's great with heat gun .
Finished apart from a few screws I forgot to order.
What next ?
Finished apart from a few screws I forgot to order.
What next ?
You do not have the required permissions to view the files attached to this post.
1 x
-
Bieworm
- Verbose Moderator
- Posts: 2450
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: Modulus Amps Marshbar
Congrats! That look like a nice job on your behalf 
1 x
"THIS should be played at high volume..preferably in a residential area"
-
SpeedTrip
- Unrated
- Posts: 13
- Joined: Sat 03/02/24 10:43 am
Re: Modulus Amps Marshbar
Many thanks. I enjoyed the assembly of the supplied parts.
Guess the next task is to decide what I'm going to build and sort out schematic, layout and pick list.
I'm sort of wondering about using something in the same chassis so I can swap out the Modulus amp (though it could just sit as a head). Anyhow that's for after Xmas, got a guitar to finish.
Guess the next task is to decide what I'm going to build and sort out schematic, layout and pick list.
I'm sort of wondering about using something in the same chassis so I can swap out the Modulus amp (though it could just sit as a head). Anyhow that's for after Xmas, got a guitar to finish.
2 x