AO-29 into lite IIb 6v6 version
Moderators: colossal, zaphod_phil, CurtissRobin, Daviedawg, Graydon
- Patrick620
- Occasional poster

- Posts: 137
- Joined: Thu 03/04/10 2:00 am
- Location: Wichita, Ks.
AO-29 into lite IIb 6v6 version
I found a thread that mentioned a layout and schematic for this but I can't seem to find them.
0 x
- JMPGuitars
- Super Duper Admin

- Posts: 4403
- Joined: Tue 09/18/12 8:00 pm
- Location: South Central, MA
- Contact:

Re: AO-29 into lite IIb 6v6 version
Hi,
It might help if you share a link to the thread you're referring to?
Thanks,
Josh
It might help if you share a link to the thread you're referring to?
Thanks,
Josh
0 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Troubleshooting Basics:
Step 1: Remove and discard all JJ tubes.
Step 2: Highlighter test.
Step 3: Use a Voltage Chart from the downloads section to test your voltages.
Web Design: flashydragon.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Troubleshooting Basics:
Step 1: Remove and discard all JJ tubes.
Step 2: Highlighter test.
Step 3: Use a Voltage Chart from the downloads section to test your voltages.
Web Design: flashydragon.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
- Patrick620
- Occasional poster

- Posts: 137
- Joined: Thu 03/04/10 2:00 am
- Location: Wichita, Ks.
Re: AO-29 into lite IIb 6v6 version
Lets just start over with a new thread. I think the old ones and the search is not bringing up the old stuff that I say referred to by "veets" (maybe) one of his post said "do a search" and I got zero. I have built 3 Lite II b's from ao-35 a now want to build a version 5y3, 6v6x2, and 12a*7 x2 from an AO-29 i have on hand. Not a 5E3 or Hoffman. I have found some info on here with some of the mods for using 6v6 and not 6bq5. I am hoping for some input on this from experience. Not much difference in the PT voltages. I have not yet checked on the OT's windings ratios. Probably about the same but not sure. The Ot's do have different numbers on them. https://www.facebook.com/profile.php?id=100063564562104
You do not have the required permissions to view the files attached to this post.
0 x
