I have a few PIcs i would like to post . They seem to be just a tad too big to attach....How do i edit the PICs to fit so i can post them? Can anybody help me on this?
Thanks!
Donations
PIC post help
Moderators: colossal, zaphod_phil, CurtissRobin, Daviedawg, Graydon
-
Gabi
- Senior Amp Tech
- Posts: 1753
- Joined: Fri 11/22/02 2:00 am
- Location: Arlington Heights, IL
- Contact:
JT...
Are these pics about your finished 18 watt amp? If yes, I can make an album for you in the Gallery section where you can upload your pictures.
If they need re-proccesing (reducing size, etc.) you can upload them at this place (ftp://18watt:18watt@pattersongray.com). Go there with your browser, and just drag-and-drop your pictures there.
Let me know...
Gabi.
Are these pics about your finished 18 watt amp? If yes, I can make an album for you in the Gallery section where you can upload your pictures.
If they need re-proccesing (reducing size, etc.) you can upload them at this place (ftp://18watt:18watt@pattersongray.com). Go there with your browser, and just drag-and-drop your pictures there.
Let me know...
Gabi.
0 x
-
JT
- Occasional poster
- Posts: 121
- Joined: Fri 03/14/03 2:00 am
- Location: USA
-
Gabi
- Senior Amp Tech
- Posts: 1753
- Joined: Fri 11/22/02 2:00 am
- Location: Arlington Heights, IL
- Contact:
-
Plexi
- Charter Member
- Posts: 4305
- Joined: Fri 03/14/03 2:00 am
- Location: Ky. USA
JT: i haven't got to look real close yet.. but one thing looks odd. it may be i just can't get a good look at it from the pic angle..
But look at the resistor 100K over on V3.. the .05 cap attached to it..looks like you have both ends attached.. the 100k should have B+ to it and feeds the tube plate..the coupling cap.. .05 one end attaches to the plate side..and other side is to ground.. It looks like you have the 100k and .05 together?? I'll look some more..
Richie
But look at the resistor 100K over on V3.. the .05 cap attached to it..looks like you have both ends attached.. the 100k should have B+ to it and feeds the tube plate..the coupling cap.. .05 one end attaches to the plate side..and other side is to ground.. It looks like you have the 100k and .05 together?? I'll look some more..
Richie
0 x
-
JT
- Occasional poster
- Posts: 121
- Joined: Fri 03/14/03 2:00 am
- Location: USA
Richie,
I took a look and you were correct i was thinking of the Resistor as a jumper and thought that it did not matter which side of the tube the wires were connected to since it was all connected anyway.....Please excuse my ignorance.....I am still in the learning process and do most of my building from Layouts, Schematics, and PICs.the terminology and know how is coming but has not quite arrived yet
..i iwll post my findings on my original startup post as not to take up to much space with the same topice.Thanks again!
I took a look and you were correct i was thinking of the Resistor as a jumper and thought that it did not matter which side of the tube the wires were connected to since it was all connected anyway.....Please excuse my ignorance.....I am still in the learning process and do most of my building from Layouts, Schematics, and PICs.the terminology and know how is coming but has not quite arrived yet
..i iwll post my findings on my original startup post as not to take up to much space with the same topice.Thanks again!
0 x
-
Plexi
- Charter Member
- Posts: 4305
- Joined: Fri 03/14/03 2:00 am
- Location: Ky. USA
"""Please excuse my ignorance.....I am still in the learning process and do most of my building from Layouts, Schematics, and PICs.the terminology and know how is coming but has not quite arrived yet ."""
Everyone makes simple mistakes, you also learn from them.Most of the time they are the simple ones that can cause even experienced builders to not see the problem.
And posting is no problem.. Sometimes others may benifit from your posts.
Mark has those hawk eyes..he may be able to see something that i don't..
Looks like clean neat work..
i like the handle on the cab too..
Richie
Everyone makes simple mistakes, you also learn from them.Most of the time they are the simple ones that can cause even experienced builders to not see the problem.
And posting is no problem.. Sometimes others may benifit from your posts.
Mark has those hawk eyes..he may be able to see something that i don't..
Looks like clean neat work..
i like the handle on the cab too..
Richie
0 x
-
JT
- Occasional poster
- Posts: 121
- Joined: Fri 03/14/03 2:00 am
- Location: USA