Inside traynor peek pic

General Tech Discussion - Anything amp-ish goes!

Moderators: colossal, zaphod_phil, CurtissRobin, Daviedawg, Graydon

Post Reply
LPC

Inside traynor peek pic

Post by LPC »

I opened it up to take a peek...I snapped this for any other Traynor freaks - pretty cool

If my 18 sounds anywhere near as good as this thing when I finally get it done I ll be thrilled.
0 x

Plexi
Charter Member
Charter Member
Posts: 4305
Joined: Fri 03/14/03 2:00 am
Location: Ky. USA

Post by Plexi »

Yep i own 2 YBA bassmasters a 65 and 72.. plexified..they sound great..

Richie
0 x

User avatar
Benboom
Occasional poster
Occasional poster
Posts: 106
Joined: Sun 10/12/03 2:00 am
Location: Portland, Oregon
Contact:

Post by Benboom »

Interesting to see that they wired the heaters last - all the heater wires are running above the audio circuits.
0 x

User avatar
Graydon
Admin, Charter Member
Admin, Charter Member
Posts: 1632
Joined: Fri 01/31/03 2:00 am
Location: USA
Contact:
United States of America

Post by Graydon »

Benboom wrote:Interesting to see that they wired the heaters last - all the heater wires are running above the audio circuits.
Dumble does this too.
0 x
Sincerely,
Graydon Stuckey
www.gdsamps.com
www.guytron.com

AppleScruff

Post by AppleScruff »

Benboom wrote:Interesting to see that they wired the heaters last - all the heater wires are running above the audio circuits.
The idea is to get the heater wires away from the high impedance of the other pins. They don't care if the heater wires are above or below them just so you don't get any coupling between them. If you run them tight up to the chassis you can have problems as well.
0 x

User avatar
Benboom
Occasional poster
Occasional poster
Posts: 106
Joined: Sun 10/12/03 2:00 am
Location: Portland, Oregon
Contact:

Post by Benboom »

I think I'll try that the next amp I build. I have one amp that has been haunted since day one and I still haven't sorted it out even with mega help from Richie; maybe that would have helped.
0 x

Post Reply