tung sol new production 6v6,any good?

Tube-specific discussions

Moderators: colossal, zaphod_phil, CurtissRobin

Post Reply
borling
Occasional poster
Occasional poster
Posts: 110
Joined: Wed 04/05/06 2:00 am

tung sol new production 6v6,any good?

Post by borling »

Hi Boling here; A friend of mine suggested using new tung sol`s 6v6`s in my Tweed deluxe.Does anyone have any experience with these tubes?thanks borling
0 x

rjgtr
Builder, Admin
Builder, Admin
Posts: 6668
Joined: Wed 11/24/04 2:00 am
Location: Jax, FL
Contact:

Post by rjgtr »

borling,

I don't have experience with them, but they are made by New Sensor in the Sovtek factory. If my recent experience with their Tunsol 12ax7 is any indication, then it's likely to be a good tube, but not exceptional. Certainly better than the Sovtek 6V6s, which are simply Ok in my opinion.

I'd say you are best off either finding some NOS 6V6s (RCAs or Sylvanias maybe) or using JJ 6V6s. JJ 6V6s are proven and reliable, and also sound very nice too.
0 x

krash
Frequent poster
Frequent poster
Posts: 557
Joined: Mon 02/27/06 2:00 am
Location: Austin, TX
Contact:

Post by krash »

well I like the 6V6EH personally but the JJs sound ok too. The EH's sound pretty much spot on exactly like my old RCA black-plate tubes always did, and last longer, taking a ton of abuse in my Princeton Reverb.
0 x

User avatar
s2
Senior Amp Tech
Senior Amp Tech
Posts: 3182
Joined: Thu 05/20/04 2:00 am
Location: Dallas, TX
Contact:

Post by s2 »

Just MHO, but I like the TS better than the EH. I like it equally as well as the JJ. I tend to lean toward the TS now because the JJ suffers from mechanical noise.

I have NOS RCA stuff in most of my 6V6 amps, but in the ones that are running new production, I have a pair of JJs in my custom Deluxe head and a pair of TS in my 5E3 combo.
0 x
--s2
Custom Amplifiers
Amp Parts & Accessories
www.s2amps.com
www.category5amps.com

borling
Occasional poster
Occasional poster
Posts: 110
Joined: Wed 04/05/06 2:00 am

6v6

Post by borling »

:D Bit the bullet and got some RCA Blackplates off the sarge as well as some pre amps. :idea: I`m sold ,nos is way better .Like turning on a light in a dark room :idea:
0 x

User avatar
spunky
Occasional poster
Occasional poster
Posts: 184
Joined: Thu 05/18/06 2:00 am
Location: Redondo Beach, California

Post by spunky »

I used to use NOS RCA 6V6 and NOS RCA 12AX7 tubes in my 5F1 Tweed Champ.

It has the TS preamp tube in it now. Much better than the RCA, Sylvania or GE NOS tubes I've tried.

If I can, I buy TS for all my tube needs both preamp and power.
I didn't know TS had a 6V6 tube.....

I'll let everyone else buy the NOS tubes....some are outrageously expensive!
0 x

Sweetwood
Frequent poster
Frequent poster
Posts: 676
Joined: Wed 05/12/04 2:00 am
Contact:

Post by Sweetwood »

i will let you know first hand as soon as my deluxe reverb gets off the block.
0 x

novemberrain
Verbose poster
Verbose poster
Posts: 1191
Joined: Sat 01/22/05 2:00 am

Post by novemberrain »

spunky wrote:I'll let everyone else buy the NOS tubes....some are outrageously expensive!
I've been getting so many NOS 6V6s these days I can't imagine buying new production, it seems every old lady I meet has a caddy in her basement and every caddy has NOS 6V6s in it!

Guess I'm gettin' old enough that the OLD ladies think I'm "cute"! :lol:

At this rate I'll have every NOS 6V6 in North America by Christmas! :lol:
0 x

ScottS
Newbie
Newbie
Posts: 55
Joined: Thu 05/04/06 2:00 am
Location: SW CR IA US NA PE

Post by ScottS »

novemberrain wrote:
spunky wrote:I'll let everyone else buy the NOS tubes....some are outrageously expensive!
I've been getting so many NOS 6V6s these days I can't imagine buying new production, it seems every old lady I meet has a caddy in her basement and every caddy has NOS 6V6s in it!

Guess I'm gettin' old enough that the OLD ladies think I'm "cute"! :lol:

At this rate I'll have every NOS 6V6 in North America by Christmas! :lol:
The "Tube Gigolo", everyone. ;)
0 x

User avatar
bigtbluesman
Unrated
Posts: 8
Joined: Fri 05/26/06 2:00 am
Location: Unknown

Post by bigtbluesman »

Hi,

imho, the Bendex #5992 will kick the doggie squeeze out of any 6V6 out today. They are a Military tube made by by Bendex in Red Bank NJ, when the Air Force was building tube based electronics for bombers. They are super , super, rugged, they have a strong gain, and they sound great.

You can get these tubes from Jim Cross at Vacuum Tubes Inc. in Orlando, Fl, (they have a great web page).

I use them in my %13's and my Germeno 25 watt Masonette with great results, no failures @ gigs, etc. They also sound great in BF Fenders


Bigtbluesman
0 x

User avatar
spunky
Occasional poster
Occasional poster
Posts: 184
Joined: Thu 05/18/06 2:00 am
Location: Redondo Beach, California

Post by spunky »

bigtbluesman,

At $48.00 each plus shipping............


Tung Sol please.....I am not a RICH man........

Do you use these as preamp tubes then?
Telefunken Diamond Bottom ECC803s
0 x

User avatar
bigtbluesman
Unrated
Posts: 8
Joined: Fri 05/26/06 2:00 am
Location: Unknown

5992's and Telefunkins

Post by bigtbluesman »

Hi,

I thought that they were worth it> Very much superior than any other NOS 6V6.

No, I don't use Tele s, as they are too, too, bright souding for my ear. My favorite pre=amp tube are Amperex "bugle boy" 12AX7's. They do it for me over Mullards, Teles, etc.


BigT
0 x

User avatar
aphekgreg
Newbie
Newbie
Posts: 89
Joined: Sun 07/10/05 2:00 am
Location: Australia
Contact:

Post by aphekgreg »

I just did a comparison of 6V6s, with NOS Sylvanias, Tung-Sol, EH and Chinese versions. Of this lot the Tung-Sols were the winner and the Sylvanias the loser.
0 x

soundmasterg
Newbie
Newbie
Posts: 49
Joined: Thu 11/17/05 2:00 am
Location: Cornelius, Oregon

Post by soundmasterg »

There is a problem with the Sovtek/EH/TS 6V6's in that the screen grid support rods are smaller than NOS and JJ ones, and the screen grids will fail or short under moderate to heavy use. This was pointed out along with pics by Tremo at the Amp Workshop page. Take a look-see.

Greg

http://p210.ezboard.com/fampworkshopfrm ... =581.topic
0 x

Post Reply