What is bridged channels in 36 watt RP

Antti · Post by **Antti** » Tue 03/27/07 2:40 pm

What do people mean by bridged channels in my RP?(ceriatone)

Thanks!

allgonoslow · Post by **allgonoslow** » Tue 03/27/07 4:37 pm

I'm not sure what an "RP" is. But bridging the channels is done by plugging into one channel (say the HI input) and using a short patch cable, bridging from the LO input up to the HI input on the other channel. Or you could use a Y cable.

If the channels are in phase with each other then you can fine tune the tonal characteristics of both channels and mix them for more complex tones. If they're out of phase then things cancel out and sound like garbage.

Antti · Post by **Antti** » Tue 03/27/07 5:26 pm

Thanks man!

Antti · Post by **Antti** » Tue 03/27/07 6:42 pm

Hi! By "RP" i mean the Richie Plexi from ceriatone.

allgonoslow · Post by **allgonoslow** » Tue 03/27/07 11:50 pm

Oh, in that case bridging the channels will sound best when the amp is nice and cranked.

Donations

Links

Welcome

What is bridged channels in 36 watt RP

What is bridged channels in 36 watt RP