VJ Marshallized too bright (Bad Cat Mod?)
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
- Sully
- Newbie
- Posts: 25
- Joined: Mon 03/19/07 2:00 am
- Location: South New Jersey
VJ Marshallized too bright (Bad Cat Mod?)
Hey Guys
I switched out R15 with 2- 33K resistors, and its still way too bright for me.
What would be my next step ?
Someone mentioned the Bad Cat mod ?, I looked in the repository and couldn't find anything. Any clues.
thanks ...sully
I switched out R15 with 2- 33K resistors, and its still way too bright for me.
What would be my next step ?
Someone mentioned the Bad Cat mod ?, I looked in the repository and couldn't find anything. Any clues.
thanks ...sully
0 x
-
- Newbie
- Posts: 94
- Joined: Wed 09/14/05 2:00 am
- Location: The Netherlands
- Contact:
- zaphod_phil
- Builder, Admin
- Posts: 15208
- Joined: Wed 03/19/03 2:00 am
- Location: YYZ
Take a look at http://www.schematicheaven.com/newamps/ ... inicat.pdf Note the 100k resistor and 2.2nF cap between the EL84 grid and ground. That's it.
I still find it strange that your amp is so awfully bright....
I still find it strange that your amp is so awfully bright....
0 x
Nature abhors a clean tube amp
- Sully
- Newbie
- Posts: 25
- Joined: Mon 03/19/07 2:00 am
- Location: South New Jersey
Way too bright, I like a real dark, brooding crunch.
This is what was on the list,
Optional. This helps smooth off top end brightness. Shouldn't be required if R15 = 10k or more
My R15 is already 66K ??? ( I took 2 - 33K's and twisted them together)
Whats a guy to do, think I should do this mod too, or is there another way to go ?
thanks ...sully
This is what was on the list,
Optional. This helps smooth off top end brightness. Shouldn't be required if R15 = 10k or more
My R15 is already 66K ??? ( I took 2 - 33K's and twisted them together)
Whats a guy to do, think I should do this mod too, or is there another way to go ?
thanks ...sully
0 x
-
- Newbie
- Posts: 84
- Joined: Thu 08/03/06 2:00 am
- Location: Just up the road from Marshall country, UK.
- Sully
- Newbie
- Posts: 25
- Joined: Mon 03/19/07 2:00 am
- Location: South New Jersey
Hey G
I'm not sure !
I took the 2 - 33K resistors, and put them side by side, twisted the leads together, tinned the ends, then soldered them to the posts, I'm not sure if this is parellel or series, I'm still green !
thanks ...sully
ps. I expected the difference to be more noticeable that what I heard.
I'm not sure !
I took the 2 - 33K resistors, and put them side by side, twisted the leads together, tinned the ends, then soldered them to the posts, I'm not sure if this is parellel or series, I'm still green !
thanks ...sully
ps. I expected the difference to be more noticeable that what I heard.
0 x
-
- Occasional poster
- Posts: 375
- Joined: Sat 10/29/05 2:00 am
- Location: Vancouver, WA
- Contact: