Valve junior specifications needed!
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
- dancindave
- Newbie
- Posts: 94
- Joined: Tue 07/04/06 2:00 am
- Location: Albuquerque,NM
Valve junior specifications needed!
hey y'all, can someone measure on their head chassis for these three things:1) The positions of the screw mounting holes, I.e, distance from the edges to the mounting hole.
2) The width of the flanges on the chassis
3) The size of the screws used for mounting. I have an exciting project I want to unveil and need these measurements to finish up. thank you!!
2) The width of the flanges on the chassis
3) The size of the screws used for mounting. I have an exciting project I want to unveil and need these measurements to finish up. thank you!!
0 x
- dancindave
- Newbie
- Posts: 94
- Joined: Tue 07/04/06 2:00 am
- Location: Albuquerque,NM
- dancindave
- Newbie
- Posts: 94
- Joined: Tue 07/04/06 2:00 am
- Location: Albuquerque,NM
- guitbusy
- Newbie
- Posts: 44
- Joined: Mon 09/18/06 2:00 am
- Location: Michigan
position of the screw mounting holes = 1.133 inches there is a little play as there is a threaded insert, similiar to what is put in an audio rack, in a square cut out(this is measure from the width end)
flange width on mine = .781 inches
size of the screws = unfortunately I can't find my mounting screws right now, maybe someone else can help out while I look.
flange width on mine = .781 inches
size of the screws = unfortunately I can't find my mounting screws right now, maybe someone else can help out while I look.
0 x
- guitbusy
- Newbie
- Posts: 44
- Joined: Mon 09/18/06 2:00 am
- Location: Michigan
position of the screw mounting holes = 1.133 inches there is a little play as there is a threaded insert, similiar to what is put in an audio rack, in a square cut out(this is measure from the width end)
flange width on mine = .781 inches
size of the screws = unfortunately I can't find my mounting screws right now, maybe someone else can help out while I look.
flange width on mine = .781 inches
size of the screws = unfortunately I can't find my mounting screws right now, maybe someone else can help out while I look.
0 x
- Bulatovic
- Occasional poster
- Posts: 292
- Joined: Fri 12/08/06 2:00 am
- Location: Egham, UK / Belgrade, Serbia
- dancindave
- Newbie
- Posts: 94
- Joined: Tue 07/04/06 2:00 am
- Location: Albuquerque,NM