Question about chassis anodizing
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
-
- Newbie
- Posts: 58
- Joined: Thu 04/12/07 2:00 am
- Location: Atlanta
Question about chassis anodizing
During the process of anodizing aluminum, the chassis should become non conductive. Am I correct in assuming that this would be a bad thing as far as grounding goes? You would want the chassis to be conducive for a proper ground, correct?
0 x
-
- Newbie
- Posts: 84
- Joined: Thu 08/03/06 2:00 am
- Location: Just up the road from Marshall country, UK.