my latest beast
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
-
- Verbose poster
- Posts: 1335
- Joined: Fri 10/22/04 2:00 am
- Location: calgary alberta canada
- Contact:
my latest beast
Here's a shot of my latest amp.It's a higher gain 2204 with 6V6's.It is fabulous sounding!It has power dampening and an effects loop.
0 x
-
- Newbie
- Posts: 74
- Joined: Mon 09/18/06 2:00 am
- Location: Indiana
- Contact:
- allynmey
- Verbose poster
- Posts: 1131
- Joined: Sat 12/04/04 2:00 am
- Location: Dighton, MA USA
- Contact:
- Michael
- Frequent poster
- Posts: 572
- Joined: Thu 05/04/06 2:00 am
- Location: Charleston
- Contact:
Re: my latest beast
Best one yet? Will it replace your "go to" amp?phsyconoodler wrote:Here's a shot of my latest amp.It's a higher gain 2204 with 6V6's.It is fabulous sounding!It has power dampening and an effects loop.
Very nice!
0 x
- jonnysocko
- Occasional poster
- Posts: 133
- Joined: Sun 09/10/06 2:00 am
- Location: Zumbrota, MN
- Contact:
Re: my latest beast
phsyconoodler wrote:Here's a shot of my latest amp.It's a higher gain 2204 with 6V6's.It is fabulous sounding!It has power dampening and an effects loop.
Nice phsyco! I wanna see the guts! I'm kinda gross that way : )
BH
0 x
- veets
- Frequent poster
- Posts: 690
- Joined: Tue 08/02/05 2:00 am
- Location: Ontario, Canada
-
- Verbose poster
- Posts: 1335
- Joined: Fri 10/22/04 2:00 am
- Location: calgary alberta canada
- Contact:
-
- Newbie
- Posts: 37
- Joined: Thu 12/14/06 2:00 am
- Location: Unknown
- afibmx
- Unrated
- Posts: 2
- Joined: Thu 07/20/06 2:00 am
- Location: Unknown
Ive built something simliar it was a 2204 preamp into mark huss' 6v6 plexi's poweramp. It sounded really good but i took it apart to re build it into a new better looking chassis and havent gotten around to it. I dont remember where i got the layout for the preamp but the poweramp layout and schematic are at his site here. http://mhuss.com/Plexi6V6/index.htmldeiseldave wrote:A 2204 into 6V6's is what I'm wanting to build. Do you have any build stuff you can share (schamatic, layout, etc.) ?
0 x
-
- Verbose poster
- Posts: 1335
- Joined: Fri 10/22/04 2:00 am
- Location: calgary alberta canada
- Contact:
It's just a 2204 with some mods for more gain and removal of the treble peaking circuit.Some guys just have the high input,but I like having the low input for clean strat tones.
Go to Thundertweaks and they have a hotrod 2204 layout.I don't go as far as they do,but leave some room for cleans.
As soon as I can I'll post some clips.I have a friend with some rack recording gear and he is busy right now.Believe me,this amp is killer sounding!I used my own version of power dampening that I want to let stand the test of time before I share it with you guys.Nothing original,just a little tweak different.I want to make sure it doesn't melt anything before I post the schematic.
Go to Thundertweaks and they have a hotrod 2204 layout.I don't go as far as they do,but leave some room for cleans.
As soon as I can I'll post some clips.I have a friend with some rack recording gear and he is busy right now.Believe me,this amp is killer sounding!I used my own version of power dampening that I want to let stand the test of time before I share it with you guys.Nothing original,just a little tweak different.I want to make sure it doesn't melt anything before I post the schematic.
0 x