I'm building the richamp 36W off the current layout - http://www.18watt.com/storage/36watt.png Trying to avoid crossing wires, I'm wondering about the jumpers on the same numbered pin on paired tubes. Is it ok for these to be "in the air" as opposed to laying in the chassis?
IE V6 and V7 pin 9 and V4 and V5 pin 9 and so on....
Donations
Wiring the power tubes question?
Moderators: colossal, zaphod_phil, CurtissRobin, Daviedawg, Graydon
-
BBQLS1
- Old timer, Never stops talking
- Posts: 2104
- Joined: Thu 11/17/05 2:00 am
- Location: Red Stick Louisiana!
Wiring the power tubes question?
0 x
Don´t ask me what I think of you. I might not give the answers you want me to.
-
markh
- Charter Member
- Posts: 1503
- Joined: Wed 12/18/02 2:00 am
- Location: SE PA, USA
- Contact:
