Pentode (EF86) pre-amps and combo's?

18watt-specific Tech Talk - Building, Fixing, Parts, Mods...

Moderators: CurtissRobin, colossal, zaphod_phil, Daviedawg, Graydon

StarGeezers
Frequent poster
Frequent poster
Posts: 659
Joined: Tue 07/15/08 2:00 am
Location: New Orleans

Re: Pentode (EF86) pre-amps and combo's?

Post by StarGeezers »

Just a little more on pentodes .... We’ve had excellent results (Thanks to ZP ! ) with the “ 6SJ7 Pentode 18 watt Lite...Formerly the ABSOLUTE Minimum , and had no troubles with microphonics ... Nice Sweet Tone , loves pedals , LOUD !!! 8)
Also have had Great success with the 6U8 , triode pentode tube in the “Croaker “ series at Wattkins.com ... Again chime and sweetness of Tone .... been called “ Jimi in a box” ... :mrgreen:

Lots of alternative pentodes to choose from ... just sayin’ ... and we gig with ours , so it’s been well tested ... :wink:
0 x

DaveW
Occasional poster
Occasional poster
Posts: 139
Joined: Sun 06/18/06 2:00 am
Location: UK

Re: Pentode (EF86) pre-amps and combo's?

Post by DaveW »

I have used EF83 tubes, they are cheap, pin compatible with EF86 and can be got quite cheaply. They can be found in some Grundig reel to reel recorders where they were used used for automatic level control.
0 x

User avatar
zaphod_phil
Builder, Admin
Builder, Admin
Posts: 15208
Joined: Wed 03/19/03 2:00 am
Location: YYZ

Re: Pentode (EF86) pre-amps and combo's?

Post by zaphod_phil »

Yes, there is some evidence that the degree of microphony is dependent on the type of tube, with EF86s possibly being more sensitive to microphony than other types. I've also had reports that Amperex Bugle Boy EF86s are pretty good with microphony, and shouldn't normally need shock mounting.
0 x

DaveW
Occasional poster
Occasional poster
Posts: 139
Joined: Sun 06/18/06 2:00 am
Location: UK

Re: Pentode (EF86) pre-amps and combo's?

Post by DaveW »

I have recently got a bunch of 5725 (6AS6W) pentodes, which are 7 pin valves used in military airborne applications and are stated as able to withstand severe mechanical vibration.

Has anyone tried these as a preamp?

http://www.r-type.org/pdfs/5725.pdf" onclick="window.open(this.href);return false;
0 x

StarGeezers
Frequent poster
Frequent poster
Posts: 659
Joined: Tue 07/15/08 2:00 am
Location: New Orleans

Re: Pentode (EF86) pre-amps and combo's?

Post by StarGeezers »

Dave , that’s Very Interesting !!! Thanks !!! 8)
0 x

DaveW
Occasional poster
Occasional poster
Posts: 139
Joined: Sun 06/18/06 2:00 am
Location: UK

Re: Pentode (EF86) pre-amps and combo's?

Post by DaveW »

I came across this link about the little dot headphone amp which uses the 5725 as a preamp tube, so I guess they must be OK for audio applications.

http://www.littledot.net/forum/viewtopic.php?f=9&t=815" onclick="window.open(this.href);return false;
0 x

User avatar
jazbo8
Unrated
Posts: 14
Joined: Sat 12/22/12 3:38 am

Re: Pentode (EF86) pre-amps and combo's?

Post by jazbo8 »

DaveW wrote:I came across this link about the little dot headphone amp which uses the 5725 as a preamp tube, so I guess they must be OK for audio applications.

http://www.littledot.net/forum/viewtopic.php?f=9&t=815" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;
Found a brief mention on AX84, a few more others to try as well.
0 x
Jaz 

StarGeezers
Frequent poster
Frequent poster
Posts: 659
Joined: Tue 07/15/08 2:00 am
Location: New Orleans

Re: Pentode (EF86) pre-amps and combo's?

Post by StarGeezers »

Lots of pentode Fun going on at Wattkins ... http://www.wattkins.com/node/18704" onclick="window.open(this.href);return false;
0 x

Isaac Stuckey
OEM Amp builder
OEM Amp builder
Posts: 44
Joined: Thu 12/27/12 2:49 pm

Re: Pentode (EF86) pre-amps and combo's?

Post by Isaac Stuckey »

Lots of people talk about pentode problems in preamp and microphonics, but can anyone advise on building a ef86 preamp (ac15 amp actually), into a head. Many of the posts I have read are in regard to noise problems from speakers etc. but I'm building a head, so any ideas?
0 x
-IsaacGDS/Guytron Amplificationhttp://www.GDSamps.com" onclick="window.open(this.href);return false;   http://www.Guytron.com" onclick="window.open(this.href);return false;

Freddy
Occasional poster
Occasional poster
Posts: 229
Joined: Wed 03/21/07 2:00 am
Location: Western PA

Re: Pentode (EF86) pre-amps and combo's?

Post by Freddy »

You will have less microphonic tube problems with a head style amp build. The speaker will not be beating the snot out of the tiny little innards in those tubes so the ones that start out not microphonic will usually stay that way. One downside is you will need two hands instead of one to transport the amp. There used to be a couple of 18 watt layouts with an EF86 in the download section. No Vox layouts though.
0 x

Isaac Stuckey
OEM Amp builder
OEM Amp builder
Posts: 44
Joined: Thu 12/27/12 2:49 pm

Re: Pentode (EF86) pre-amps and combo's?

Post by Isaac Stuckey »

It'll only weigh maybe 18-20lbs, but do you mean two hands for stability, or they don't like shaking, or what? I assumed it would be better in a head, as I have read a bunch of the posts here on ef86's, and everyone seems to build them into combos and they get insanely beat up by speakers. I have a AC30/4 schematic I'm using. And I searched the AC15 schematic several times on the internet, they are so close it was fine.
Thanks,
0 x
-IsaacGDS/Guytron Amplificationhttp://www.GDSamps.com" onclick="window.open(this.href);return false;   http://www.Guytron.com" onclick="window.open(this.href);return false;

Daviedawg
Superior Amp Tech
Superior Amp Tech
Posts: 748
Joined: Fri 01/08/10 2:00 am
Location: Scotland

Re: Pentode (EF86) pre-amps and combo's?

Post by Daviedawg »

Maybe he means a speaker cab in one hand and head in the other?

Dd
0 x

CurtissRobin
Senior Amp Tech
Senior Amp Tech
Posts: 1169
Joined: Sat 08/09/08 2:00 am
Location: Columbia River Gorge, Oregon Side

Re: Pentode (EF86) pre-amps and combo's?

Post by CurtissRobin »

+1
When you set up the head at a gig or a session, be sure to put it on something that doesn't vibrate (i.e. on or in front of a speaker cab) or get bumped around. Set it on top of a layer or two of padding on a chair or a small parsons table (I love my $7.99 Ikea "Lack" table for my home rig) or atop an effects rack. The pad attenuates and damps vibration and the "remote" location avoids vibration due to direct contact.

BTW the leg spacing of that Ikea "Lack" table http://www.ikea.com/us/en/catalog/products/20011413/" onclick="window.open(this.href);return false; is just right for a poor man's rack. 19" rack equipment fits nicely and you can use sheet metal screws to mount things (just be sure to pilot drill the holes in the legs so they don't crumble when you drive the screws).

KennyO
0 x

User avatar
JMPGuitars
Super Duper Admin
Super Duper Admin
Posts: 3954
Joined: Tue 09/18/12 8:00 pm
Location: South Central, MA
Contact:

Re: Pentode (EF86) pre-amps and combo's?

Post by JMPGuitars »

If you're worried about vibration, you could probably also use speaker isolation foam, like the stuff they use under studio monitors.
0 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright

Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info


Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale

Freddy
Occasional poster
Occasional poster
Posts: 229
Joined: Wed 03/21/07 2:00 am
Location: Western PA

Re: Pentode (EF86) pre-amps and combo's?

Post by Freddy »

I did mean amp head in one hand and speaker cabinet in the other. Usually means one more trip back to the car to get the guitar. A lot of times those microphonic tubesthat rattled and howled in a combo work fine in a head in the v2 or v3 spot.
0 x

rexracer
Occasional poster
Occasional poster
Posts: 269
Joined: Tue 02/05/08 2:00 am
Location: portland OR
Contact:

Re: Pentode (EF86) pre-amps and combo's?

Post by rexracer »

I think you also get better tone out of a dedicated tone cabinet, combo cabs are just for convenience imho.
0 x

Isaac Stuckey
OEM Amp builder
OEM Amp builder
Posts: 44
Joined: Thu 12/27/12 2:49 pm

Re: Pentode (EF86) pre-amps and combo's?

Post by Isaac Stuckey »

Finished mine yesterday. Sounds great, except need to reduce the el84 cathode cap from 18watt value (500uf) to 250uf like in a ac15, and a couple small tweaks, but it sound great, maybe the fact that I used original Celestion Blue (Vox Silver Bulldogs) speakers for playing, in a 2x12 cab... ;-) Guess that helps, but sound really great though.
Anyway, Yea in a head cabinet it sounds pretty good. I had to take the tube shield off of it as it rattled, and it really only is as Microphonic as a bad 12ax7, so its pretty reasonable. And no problems with it right on top of the cabinet. I played it through a little 1x12 with a WGS reaper in it and that was great too. It squeals with my tele, when you dime it, so I gotta try some other guitars too, as It's just that that guitar is a little microphonic itself, as the pickups arent potted. but they are pretty good.
0 x
-IsaacGDS/Guytron Amplificationhttp://www.GDSamps.com" onclick="window.open(this.href);return false;   http://www.Guytron.com" onclick="window.open(this.href);return false;

tubenit
Unrated
Posts: 19
Joined: Sun 11/11/07 2:00 am
Location: Unknown
Contact:

Re: Pentode (EF86) pre-amps and combo's?

Post by tubenit »

The 5879 pentode is a nice alternative to the EF86. We've used this in V1 in numerous builds including the HoSo56 which originally had EL84's.

http://www.el34world.com/Forum/index.php?topic=6176.0" onclick="window.open(this.href);return false;

and in overdrive sections of amps like this one:

http://www.el34world.com/Forum/index.php?topic=9636.0" onclick="window.open(this.href);return false;

With respect, Tubenit
You do not have the required permissions to view the files attached to this post.
0 x

katopan
Frequent poster
Frequent poster
Posts: 914
Joined: Mon 12/10/07 2:00 am
Location: Melb, Aust
Contact:

Re: Pentode (EF86) pre-amps and combo's?

Post by katopan »

I've got the AC15 EF86 preamp as a second channel in my 18 Watt head. Works fine except for the EF86 in there at the moment has gone noisy (it crackles) and needs replacing. I've never had microphonic issues with it.
0 x

User avatar
Ingo
Transformer Guru
Posts: 183
Joined: Wed 12/03/03 2:00 am
Location: Germany
Contact:

Re: Pentode (EF86) pre-amps and combo's?

Post by Ingo »

Hello

another very good option is to use a used EF804 from Telefunken. The differences to the EF86 are very small and it is a really very stable tube with less micro phonics than the today available 12AX7A, even selected. I have build some custom amps with that tube and the sound is really wonderful.

Best regards
Ingo
0 x

Post Reply