changing my 36 to use kt66

[menger]

The is vintage iron i pulled from wurlitzer organs and are more than up to the task, and yes this is more than likely a ppwatt project but ill post some pix here just for all the interest and thanks krx you gave most the info i needed mark

[menger]

Ok im ready for this project again, iv built the chassis but am thinking on changing this to a 36 watt light with the kt66, or maybe even a minulist 1 knob amp, iv been building the brown note lt with good results, now i was thinking of sticking the kts in there any thoughts on this? mark

[zaphod_phil]

The difference between the Lite II and Minimalist is basically the tone control, which is useful to have IMO, for very little extra cost or effort. Apart from that, just use a 15k tail resistor and a 470 ohm cathode resistor with the 18W PI. Then suitable cathode and screen resistor values for the KT66s at whatever voltage you plan on running them at.

[menger]

thanks zp, i should have some progress pix here soon mark