changing my 36 to use kt66
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
- menger
- Occasional poster
- Posts: 431
- Joined: Sun 09/21/08 2:00 am
- Location: Unknown
- menger
- Occasional poster
- Posts: 431
- Joined: Sun 09/21/08 2:00 am
- Location: Unknown
- zaphod_phil
- Builder, Admin
- Posts: 15208
- Joined: Wed 03/19/03 2:00 am
- Location: YYZ
The difference between the Lite II and Minimalist is basically the tone control, which is useful to have IMO, for very little extra cost or effort. Apart from that, just use a 15k tail resistor and a 470 ohm cathode resistor with the 18W PI. Then suitable cathode and screen resistor values for the KT66s at whatever voltage you plan on running them at.
0 x
Nature abhors a clean tube amp