HELP!! Broken NFB switch

[blaren]

Hey all,
My negative feedback switch got smashed-in on my ~2006 Ceriatone 36RP (with half power switch).
I just went to replace it but I don't have a switch that's rated as high as the original. The original is 10A 125V AC 6A 250V AC

The switch I have is 3A 125V AC 1.5A 250V AC.

Anyone know if this lower rating switch will be ok?

I have to fix this before Saturday. Our RS has no switches. I always leave the NFB "off" anyway so have no problem bypassing the switch but I don't know how.

Thanks in advance for any help anyone can provide.

[katopan]

There's no high voltage across the feedback switch, and certainly no high current through it. The switch you have should be fine.

[blaren]

Thank you VERY much for the help. You're a lifesaver.