$Mega amp on Ebay
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
- Graydon
- Admin, Charter Member
- Posts: 1619
- Joined: Fri 01/31/03 2:00 am
- Location: USA
- Contact:
$Mega amp on Ebay
Guys,
This is the amp that uses the Angela gold tube sockets that we use on our 18W amps.
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 3018498165
This is the amp that uses the Angela gold tube sockets that we use on our 18W amps.
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 3018498165
0 x
- Gabi
- Senior Amp Tech
- Posts: 1753
- Joined: Fri 11/22/02 2:00 am
- Location: Arlington Heights, IL
- Contact:
- Graydon
- Admin, Charter Member
- Posts: 1619
- Joined: Fri 01/31/03 2:00 am
- Location: USA
- Contact:
This is a el-84 stereo project that will be part of my computer sound system. Here is the schem.
http://www.geocities.com/sjittam2001/po ... l84sch.gif
I`ll use a diode string rectifier with about 350 b+ volts. It has no tone controls but should sound ok as is. Probably about 10 usable whats max since clipping is bad in audio. Plus it uses a 390 ohm cathode resistor to keep the tubes cold. I may experiment with other values though.
The PT is from Handwound Transformers and the OT`s are from an old Layfayette integrated amp.
I started this project to use up some spare parts. It should be enjoyable when finished.
Glenn Gertis
http://www.geocities.com/sjittam2001/po ... l84sch.gif
I`ll use a diode string rectifier with about 350 b+ volts. It has no tone controls but should sound ok as is. Probably about 10 usable whats max since clipping is bad in audio. Plus it uses a 390 ohm cathode resistor to keep the tubes cold. I may experiment with other values though.
The PT is from Handwound Transformers and the OT`s are from an old Layfayette integrated amp.
I started this project to use up some spare parts. It should be enjoyable when finished.
Glenn Gertis
0 x