He did ground them in the photo above.
My guess is they may need some chopsticking. They can be susceptible to noise depending on position. If it's a long run to the board, the wires should be shielded.
Thanks,
Josh
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
He did ground them in the photo above.
What speaker are you using?
Try running just 1 or 2 greenbacks and see how that sounds. Avoid the Vintage 30s and its clones, as those are inherently too bright for these amps.Tfultz wrote: ↑Fri 07/24/20 4:49 pmGreenbacks in 2x12 and WGS et65’s in 2x12 and vintage 30 and et65 in 2x12. I haven’t jammed it yet in a band setting but alone the treble is off or on 1. This amp definitely needs cranked even with master volume to get anywhere close to an 18 watt overdrive. I wonder if a dr z air brake would help?