Page 1 of 1

Dirty Face 18W

Posted: Mon 11/30/20 8:52 am
by crgfrench
I just ran across this on the Metropoulos forum, a post by "fnh_lopes" from 2015.
I wonder if anyone here has build anything similar, hi-gain 6v6 build.
Not clear whether the guy ever built this...
Screen Shot 2020-11-30 at 8.38.46 AM.png
Screen Shot 2020-11-30 at 8.39.22 AM.png
Screen Shot 2020-11-30 at 8.40.13 AM.png

Re: Dirty Face 18W

Posted: Mon 11/30/20 11:45 am
by Bieworm
Well Craig, you'll have to keep us posted on your next build 😉

Re: Dirty Face 18W

Posted: Mon 11/30/20 12:25 pm
by crgfrench
Bieworm wrote:
Mon 11/30/20 11:45 am
Well Craig, you'll have to keep us posted on your next build 😉
LOL I will but my current 6V6 build is pretty different than this.
Here's my current point-to-point layout, pretty close to final
**may still contain errors**
I have the chassis mostly drilled, still waiting for some components...
Screen Shot 2020-11-30 at 12.22.03 PM.png

Re: Dirty Face 18W

Posted: Mon 11/30/20 12:27 pm
by crgfrench
oops sorry for inadvertent reply, please ignore this one I'm typing here.

Re: Dirty Face 18W

Posted: Mon 11/30/20 12:43 pm
by Bieworm
crgfrench wrote:
Mon 11/30/20 12:25 pm
Bieworm wrote:
Mon 11/30/20 11:45 am
Well Craig, you'll have to keep us posted on your next build 😉
LOL I will but my current 6V6 build is pretty different than this.
Here's my current point-to-point layout, pretty close to final
**may still contain errors**
I have the chassis mostly drilled, still waiting for some components...Screen Shot 2020-11-30 at 12.22.03 PM.png
Where did you obtain that layout designer? It's like real pictures of resistors and electrolytics.. woozy 😀

Re: Dirty Face 18W

Posted: Mon 11/30/20 12:59 pm
by crgfrench
Bieworm wrote:
Mon 11/30/20 12:43 pm
woozy
I just make them in Powerpoint for Mac