Page 1 of 1

Re: Zener Diode Question

Posted: Mon 03/22/21 6:18 am
by JMPGuitars
Bieworm wrote:
Sun 03/21/21 12:46 pm
It's a layout from Josh. I don't think he draws the grounded side of shielded wires. But it's common practice the shielded wire is grounded at one end
I never draw the grounded side of shielded wires. People should know it's not shielded if it's not connected on one side...and I don't care for debates about which side to ground.

Though I tend to ground the side near the tube sockets using the terminal ground lug for the shield.