Mark Durham Vajra JTM45

In memory of Mark

Moderators: zaphod_phil, Graydon

Post Reply
User avatar
colossal
Moderator
Moderator
Posts: 450
Joined: Thu 05/10/07 2:00 am
Location: Moving through Kashmir

Mark Durham Vajra JTM45

Post by colossal »

Interesting to see this amp come up with some commentary on Mark and 18Watt.

https://www.youtube.com/watch?v=JcqVhnNh3Qk
3 x

Daviedawg
Superior Amp Tech
Superior Amp Tech
Posts: 748
Joined: Fri 01/08/10 2:00 am
Location: Scotland

Re: Mark Durham Vajra JTM45

Post by Daviedawg »

Thanks for the link. I will watch that later today.

Dd
0 x

ViperDoc
Occasional poster
Occasional poster
Posts: 195
Joined: Mon 05/18/20 8:09 pm

Re: Mark Durham Vajra JTM45

Post by ViperDoc »

Some nice playing out of a very nice sounding amp. I noticed the "Vajra" 18-watt build in the documents here. The 500KL pot looks like a trimmer for the other "300K", noting the parallel 750K. What does "P/P to SE" mean? "Push/Pull to ....?" Single ended?
2 x

User avatar
colossal
Moderator
Moderator
Posts: 450
Joined: Thu 05/10/07 2:00 am
Location: Moving through Kashmir

Re: Mark Durham Vajra JTM45

Post by colossal »

ViperDoc wrote:
Tue 08/24/21 3:14 pm
Some nice playing out of a very nice sounding amp. I noticed the "Vajra" 18-watt build in the documents here. The 500KL pot looks like a trimmer for the other "300K", noting the parallel 750K. What does "P/P to SE" mean? "Push/Pull to ....?" Single ended?
Yes. If you look at the P/P to SE pot, it grounds the signal on the inverting side as the pot is rotated to SE, running the amp in pseudo-single ended mode. This unbalances the phase inverter too.
1 x

Post Reply