confused by mains transformers HT current specs
Moderators: JMPGuitars, Daviedawg, Graydon, CurtissRobin, colossal, zaphod_phil
- Bieworm
- Verbose Moderator
- Posts: 2412
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
confused by mains transformers HT current specs
Hey guys
Sad news. The Dual 50 I built fried the power transformer's HT secondary.
To explain things: I used a JTM45 PT in stead of a JMP50 type. They were the same price, but the specs on the JTM45 were higher, so I thought I'd be better off with that one.
I checked everything else in the amp and all is just fine. There is no direct cause for the winding to start burning.
Specs of the JTM45: HT 345-0-345V @ 200mA / Fil 6.3V CT @ 6A
Specs for the JMP50: HT 345-0-345V @ 150mA / fil 6.3V CT @ 5A
So the JMP50 would be overloaded sooner, no?
Is it because I use the hammond 1750N, which has 3200 Ohm prim, where the JTM45 has 8000 Ohm?
Is there something other different about those power tranformers? There is no further info to be found on them.
Sad news. The Dual 50 I built fried the power transformer's HT secondary.
To explain things: I used a JTM45 PT in stead of a JMP50 type. They were the same price, but the specs on the JTM45 were higher, so I thought I'd be better off with that one.
I checked everything else in the amp and all is just fine. There is no direct cause for the winding to start burning.
Specs of the JTM45: HT 345-0-345V @ 200mA / Fil 6.3V CT @ 6A
Specs for the JMP50: HT 345-0-345V @ 150mA / fil 6.3V CT @ 5A
So the JMP50 would be overloaded sooner, no?
Is it because I use the hammond 1750N, which has 3200 Ohm prim, where the JTM45 has 8000 Ohm?
Is there something other different about those power tranformers? There is no further info to be found on them.
You do not have the required permissions to view the files attached to this post.
0 x
"THIS should be played at high volume..preferably in a residential area"
-
- Newbie
- Posts: 74
- Joined: Mon 09/06/21 11:44 am
- Bieworm
- Verbose Moderator
- Posts: 2412
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: confused by mains transformers HT current specs
No worries. Tube-Town has refunded the transformer. Ordered a JMP50 PT instead. We'll see from there
1 x
"THIS should be played at high volume..preferably in a residential area"
-
- Verbose poster
- Posts: 1118
- Joined: Mon 01/04/16 3:52 pm
Re: confused by mains transformers HT current specs
Bieworm did you have the HT centre tap fused? if so you would presume if the fault was in the circuit it would blow the fuse,looks like a duff transformer winding.
0 x
- Bieworm
- Verbose Moderator
- Posts: 2412
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: confused by mains transformers HT current specs
Geoff.. thanks for your reply.geoff 1965 wrote: ↑Wed 11/24/21 6:50 amBieworm did you have the HT centre tap fused? if so you would presume if the fault was in the circuit it would blow the fuse,looks like a duff transformer winding.
I don't have a fuse on the CT, but on the B+ right after the SS rectifier. It's a 500mA fuse.
0 x
"THIS should be played at high volume..preferably in a residential area"
-
- Verbose poster
- Posts: 1118
- Joined: Mon 01/04/16 3:52 pm
Re: confused by mains transformers HT current specs
would'nt you be better placing the 500mA fuse between the HT centre tap and ground?
0 x
- Bieworm
- Verbose Moderator
- Posts: 2412
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: confused by mains transformers HT current specs
Not sure... I followed a schematic from Sluckey. I presume he knows his stuff...geoff 1965 wrote: ↑Wed 11/24/21 7:48 amwould'nt you be better placing the 500mA fuse between the HT centre tap and ground?
You think it's better on the CT? I have to reinstall a transformer, so moving the fuse is easily done I guess...
You do not have the required permissions to view the files attached to this post.
0 x
"THIS should be played at high volume..preferably in a residential area"
-
- Verbose poster
- Posts: 1118
- Joined: Mon 01/04/16 3:52 pm
Re: confused by mains transformers HT current specs
See what you mean,first time i’ve seen the HT fuse in that position.so did that fuse blow when the HT winding fried?
bye the way that looks like a cool amp!
bye the way that looks like a cool amp!
1 x
- Bieworm
- Verbose Moderator
- Posts: 2412
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: confused by mains transformers HT current specs
No that fuse is still intact. Doesn't that indicate the problem is before the fuse?geoff 1965 wrote: ↑Wed 11/24/21 9:08 amSee what you mean,first time i’ve seen the HT fuse in that position.so did that fuse blow when the HT winding fried?
bye the way that looks like a cool amp!
Let me explain what I experienced.
The owner called me it was blowing (3A mains) fuses. I received the amp, and not having my light bulb limiter on had I tried another fuse to see it for myself. And it blew indeed...
Then I removed all tubes and put in another fuse. I put the 'on' switch on. That's when it started smoking, even on standby. It didn't blow fuses anymore.. it just smoked.
I disconnected the secondaries and measured resistances..
filaments winding = 0.3 Ohms
HT winding = 38 Ohms
no short on the heaters.. no short on B+ nodes anywhere...
diode test = +/- 500mV on all diodes
filter caps measure fine (preamp filters 250k Ohm, poweramp filters 220k Ohm)
bias elco's 82k Ohm
0 x
"THIS should be played at high volume..preferably in a residential area"
-
- Verbose poster
- Posts: 1118
- Joined: Mon 01/04/16 3:52 pm
Re: confused by mains transformers HT current specs
That fuse placement is the same as the Marshall 1987 but what is puzzling me is there is the 50/50uf can cap and the diodes between the winding and fuse.the bias taps off the HT before the diodes so to protect the HT winding if there was a problem would’nt the fuse be better directly on the centre tap to ground?
Tricky one to work out!
Tricky one to work out!
1 x
- Bieworm
- Verbose Moderator
- Posts: 2412
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: confused by mains transformers HT current specs
The fuse on the center tap makes more sense if you think about it. Another good solution is to install 2 fuses... one on each side of the HT windinggeoff 1965 wrote: ↑Wed 11/24/21 10:17 amThat fuse placement is the same as the Marshall 1987 but what is puzzling me is there is the 50/50uf can cap and the diodes between the winding and fuse.the bias taps off the HT before the diodes so to protect the HT winding if there was a problem would’nt the fuse be better directly on the centre tap to ground?
Tricky one to work out!
0 x
"THIS should be played at high volume..preferably in a residential area"
-
- Verbose poster
- Posts: 1118
- Joined: Mon 01/04/16 3:52 pm
Re: confused by mains transformers HT current specs
Bieworm there is a thread over on “EL34 world” concerning the fuse placement,one of the reasons it’s not on the centre tap is because of the bias tap,check it out,still puzzles me how the HT winding fried and the 500mA fuse did’nt blow!
0 x