Reduce noise
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
-
- Unrated
- Posts: 7
- Joined: Sat 05/21/22 5:24 pm
Reduce noise
Without dialing down the volume, as that's just silly. What mods could I try on my 18watt clone to minimize noise and overbearing hum when using a strat? I've heard grid resistors? Obviously it gets a lot better when using middle and bridge pickup together in a humbucking fashion. Attached is the schematic I used to build. I also added master volume and a treble and bass tone stack.
You do not have the required permissions to view the files attached to this post.
0 x
- Unit_1
- Newbie
- Posts: 32
- Joined: Sun 11/09/14 6:35 pm
Re: Reduce noise
If you're only getting grounding on your strat (or tele's and other single coils as well) then you can shield the cavity. I did this on my 78 swamp ash tele with lollar vintage pu's and it works....
(I haven't actually seen this one, there used to be one on StuMac's site, but I can't find it)
https://www.youtube.com/watch?v=tcXuVXrCxig
(I haven't actually seen this one, there used to be one on StuMac's site, but I can't find it)
https://www.youtube.com/watch?v=tcXuVXrCxig
0 x
The ability to play/make music is a gift that not everyone gets. Those of us who have it should use it.
- Unit_1
- Newbie
- Posts: 32
- Joined: Sun 11/09/14 6:35 pm
Re: Reduce noise
Almost forgot, with the amp on and the guitar buzzing/humming you can rotate yourself (and the guitar) and find a hum free position. This also verifies that it's the guitar picking up EM from the trannies.
I used to do that before finding out about the shielding. Your coils are a big antenna, by shielding the cavity and the pick guard the only way to that coil is through the magnets. Farad shields are sometimes used inside amps and other devices for the same reason.
I used to do that before finding out about the shielding. Your coils are a big antenna, by shielding the cavity and the pick guard the only way to that coil is through the magnets. Farad shields are sometimes used inside amps and other devices for the same reason.
0 x
The ability to play/make music is a gift that not everyone gets. Those of us who have it should use it.
- Bieworm
- Verbose Moderator
- Posts: 2302
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: Reduce noise
First thing to do is to determine if the amp is extremely noisy or whether it's the guitar. Is the amp noisy without a guitar plugged in?
There are a lot of things you can do inside the amp to reduce noise, but you first have to narrow things down...
There are a lot of things you can do inside the amp to reduce noise, but you first have to narrow things down...
1 x
"THIS should be played at high volume..preferably in a residential area"
- Bieworm
- Verbose Moderator
- Posts: 2302
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: Reduce noise
Oh. And please post some pictures of the inside of your amp.
Of course when it's the amp that's noisy.. first suspects are the tubes
Of course when it's the amp that's noisy.. first suspects are the tubes
0 x
"THIS should be played at high volume..preferably in a residential area"