Mojotone conversion to SuperLite TMB
Moderators: CurtissRobin, colossal, zaphod_phil, Daviedawg, Graydon
-
- Unrated
- Posts: 3
- Joined: Fri 11/19/21 2:48 pm
- Location: Phoenix, Arizona
- Contact:
Mojotone conversion to SuperLite TMB
I like many have been lurking to find solutions to my non functional Mojotone TMB v.3. I've got the clean channel working and the TMB is non existent to really thin and tinny. After all the failed Mojotone posts I'd like to start fresh and look at the single input, 18 Watt Superlite TMB plans. What I'd like to do is keep chassis, PT, OT various input/output, tube sockets and IEC,fuse and input/stand-by. I'll piecemeal the board, turrets and board components. I want to start fresh since there was a fair amount of de-soldering of components.
1. Still confused on the Center tap vs. what comes with the Mojo PT. Would I omit the additional circuit coming from the PT?
2. Any other thoughts on my conversion?
Thanks everyone
1. Still confused on the Center tap vs. what comes with the Mojo PT. Would I omit the additional circuit coming from the PT?
2. Any other thoughts on my conversion?
Thanks everyone
0 x
- Bieworm
- Verbose Moderator
- Posts: 2287
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: Mojotone conversion to SuperLite TMB
Are you sure about the conversion? We might be able to help you at making the TMB work properly...
The SL TMB is a great and beefy amp.. but your TMB could be as well.
The SL TMB is a great and beefy amp.. but your TMB could be as well.
0 x
"THIS should be played at high volume..preferably in a residential area"
-
- Unrated
- Posts: 3
- Joined: Fri 11/19/21 2:48 pm
- Location: Phoenix, Arizona
- Contact:
Re: Mojotone conversion to SuperLite TMB
Let me get some pics together and give you all the symptoms.
Stay tuned
Stay tuned
1 x
-
- Unrated
- Posts: 3
- Joined: Fri 11/19/21 2:48 pm
- Location: Phoenix, Arizona
- Contact:
Re: Mojotone conversion to SuperLite TMB
I'm going to go forward to the SuperLite TMB build. Is there a parts list available? Again I'll swap as much over from to "Mojo" build, but have no problem replacing many/most parts if need be.
Thanks
Thanks
1 x