"Dirty Shirley" mini schematic
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
-
- Unrated
- Posts: 3
- Joined: Mon 01/04/21 8:32 pm
"Dirty Shirley" mini schematic
I found this schematic on Amp Garage--it looks like a JCM800 preamp with a cathode biased EL84 power section.
Would love to get members' thoughts on this design and to understand any possible issues.
I've got an 18 watt TMB that I am considering modding.
Thanks in advance for your sharing your ideas.
Would love to get members' thoughts on this design and to understand any possible issues.
I've got an 18 watt TMB that I am considering modding.
Thanks in advance for your sharing your ideas.
You do not have the required permissions to view the files attached to this post.
0 x
- Bieworm
- Verbose Moderator
- Posts: 2302
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: "Dirty Shirley" mini schematic
Looks ok.. but I question the grid stopper value on the EL84s. I would add the proven 8k2 resistors.. and keep that paul ruby mod ready. When you push that power amp with a plexi preamp, there will be a heck of a lot of overdrive coming at ya!
2 x
"THIS should be played at high volume..preferably in a residential area"