Organ conversion
Moderators: JMPGuitars, Daviedawg, Graydon, CurtissRobin, colossal, zaphod_phil
-
- Unrated
- Posts: 5
- Joined: Thu 08/24/23 3:49 pm
Organ conversion
Salvaged a Lowrey TP-44 Genie organ with a Leslie tremelo from a dumpster a few months back. Worked, but there were resistors and diodes missing and several keys did not work. Finally stripped it down today with the intention of building a guitar amp. Plan is to have the foot pedal be a controller for the tremelo. New to aamp building and am looking for any advice about this build.
0 x
- Bieworm
- Verbose Moderator
- Posts: 2412
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: Organ conversion
Could you post the schematic of what you have? That’s easier to determine your options
0 x
"THIS should be played at high volume..preferably in a residential area"
-
- Unrated
- Posts: 5
- Joined: Thu 08/24/23 3:49 pm
Re: Organ conversion
I am trying to find a good one online. Have downloaded a manual, but the typeprint in the schematic is not a good quality. May end up ordering a physical manual if no luck online. If I find a good one I will post it here
1 x
- TriodeLuvr
- Frequent poster
- Posts: 634
- Joined: Tue 10/16/18 11:19 am
Re: Organ conversion
Based on the schematic I found, it's 100% solid state. If that's the case, why bother?
1 x
-
- Unrated
- Posts: 5
- Joined: Thu 08/24/23 3:49 pm
Re: Organ conversion
Why bother? Because I have the components to build a guitar amplifier and want to do so. Is that a problem?
0 x
-
- Unrated
- Posts: 5
- Joined: Thu 08/24/23 3:49 pm
Re: Organ conversion
Here's the schematic for the power supply
You do not have the required permissions to view the files attached to this post.
0 x
- JMPGuitars
- Super Duper Admin
- Posts: 4102
- Joined: Tue 09/18/12 8:00 pm
- Location: South Central, MA
- Contact:
Re: Organ conversion
Potentially, yes. Since it's all solid state, the chances of any of the original parts supporting tubes is unlikely. If you're interested in building a solid state guitar amp (don't, they're terrible) you're on the wrong website for support. We may support amps beyond the 18W family, but only tube amps.
If you want to build a tube amp, the schematic for the solid state amp is useless. It's not likely that the transformers would be useful either.
0 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Web Design: DolceVittoria.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
-
- Unrated
- Posts: 5
- Joined: Thu 08/24/23 3:49 pm
Re: Organ conversion
I will go find another place to talk solid state. Didn't realize this forum was so elite
1 x
- TriodeLuvr
- Frequent poster
- Posts: 634
- Joined: Tue 10/16/18 11:19 am
Re: Organ conversion
Good luck with that. You're embarking on a project that's likely to be unrewarding in every aspect, other than being able to say you did it yourself. You might want to consider a used SS practice amp for $20-30 while you mull this over.
2 x
- Bieworm
- Verbose Moderator
- Posts: 2412
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: Organ conversion
This has nothing to do with us being some sort of elite. We are only trying to explain that none of us are familiar with completely solid state amps and trying to advise against building one. Components in SS amps are totally different from tube amp components. And SS amps sound like crap for people who build and love tube amps. It just izz what it izz
2 x
"THIS should be played at high volume..preferably in a residential area"