Hey guys..
I thought I’d share this experiment with y’all, since it turned out really well. I have built an amp using a 5F6a preamp, but gave it a sorta 18 watt power amp. In fact, I used 6AQ5/EL90 power tubes and 18 watt type power and output transformers. The NFB is on/off switchable. I also built in a bias vary tremolo that’s wiggled through an IRF840 mosfet. It really sounds fantastic!
https://youtu.be/hPN4wn4LGo4?si=BIm_IGQ_mS9DFIf3
Tweed bassman with 18watt components
Moderators: JMPGuitars, zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
-
Bieworm
- Verbose Moderator
- Posts: 2308
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Tweed bassman with 18watt components
You do not have the required permissions to view the files attached to this post.
3 x
"THIS should be played at high volume..preferably in a residential area"