Eliminating Tremolo Thumping in Marshall 18 Clone
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
-
- Unrated
- Posts: 1
- Joined: Fri 03/15/24 4:04 am
Eliminating Tremolo Thumping in Marshall 18 Clone
I have this Marshall 18 clone and it has a "tremolo thumping" issue. Once you hit "4" on the speed and intensity it starts to become audible. Increasing the speed increases the thump, just like trem ticking in a Fender. The trem ckt in this amp is identical to the Marshall 18 ckt. Any simple solution to eliminating this noise?
0 x
- Bieworm
- Verbose Moderator
- Posts: 2314
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: Eliminating Tremolo Thumping in Marshall 18 Clone
Common problem: check this
viewtopic.php?p=255910&hilit=Tremolo+noise#p255910
viewtopic.php?p=255910&hilit=Tremolo+noise#p255910
0 x
"THIS should be played at high volume..preferably in a residential area"
- marty1776
- Newbie
- Posts: 52
- Joined: Mon 03/01/04 2:00 am
Re: Eliminating Tremolo Thumping in Marshall 18 Clone
I had to re-run my plate wires under the turret board, against the chassis, away from gird wires. I knew better than this but didn't do it after converting my TMB to original tremolo. May not be your issue but something to try.
0 x