Donations
Pictures of PPIMV (Type-3 “Dual Pot” Master Volume)
Moderators: colossal, zaphod_phil, CurtissRobin, Daviedawg, Graydon
-
WhoDatty
- Unrated
- Posts: 2
- Joined: Tue 05/20/25 10:18 pm
- Location: Athens Ga
Pictures of PPIMV (Type-3 “Dual Pot” Master Volume)
Howdy. Anyone know where I can find detailed pictured of this PPIMV mod? I have the original 18w Mojotone kit. Thanks.
0 x
-
Bieworm
- Verbose Moderator
- Posts: 2653
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: Pictures of PPIMV (Type-3 “Dual Pot” Master Volume)
Hi
On your amp you will need this: If you look closely you can see the pot wired in on the photo. I added the shields of the wires on a dedicated terminal. You should add the ground wire of the pot to that turret if it's the ground turret for the grid load resistors.
On your amp you will need this: If you look closely you can see the pot wired in on the photo. I added the shields of the wires on a dedicated terminal. You should add the ground wire of the pot to that turret if it's the ground turret for the grid load resistors.
You do not have the required permissions to view the files attached to this post.
3 x
"THIS should be played at high volume..preferably in a residential area"
-
WhoDatty
- Unrated
- Posts: 2
- Joined: Tue 05/20/25 10:18 pm
- Location: Athens Ga