Buss grounding on 36 watt
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
-
- Frequent poster
- Posts: 557
- Joined: Mon 12/06/04 2:00 am
- Location: Seattle, WA
Buss grounding on 36 watt
I was wondering why the buss on the 36 watt TMB was connected on both ends. I have read that you only want one end connected, which is how the 18 watt TMB is set up. Thanks,
Chris
Chris
0 x
-
- Charter Member
- Posts: 4305
- Joined: Fri 03/14/03 2:00 am
- Location: Ky. USA
Nik drew up the layout.. I use a bit different grounding.. i use 4 seperate grounding points. Kinda break it up in sections. power supply,driver and controls and TMB inputs then the normal channel and inputs..so they all have there own ground.
Although a buss ground along the back of the pots is the normal marshall way. Or along the back of the board as some do.
Richie
Although a buss ground along the back of the pots is the normal marshall way. Or along the back of the board as some do.
Richie
0 x
-
- Frequent poster
- Posts: 557
- Joined: Mon 12/06/04 2:00 am
- Location: Seattle, WA