BNP Laser at www.bnplasers.com is who you want.
If you don't have Corel Draw, I'm sure Ramiro would be happy to help you at www.customampfaceplates.com.
Who manufactures logos?
Moderators: zaphod_phil, Daviedawg, Graydon, CurtissRobin, colossal
-
s2
- Senior Amp Tech
- Posts: 3182
- Joined: Thu 05/20/04 2:00 am
- Location: Dallas, TX
- Contact:
-
KingCrimson
- Old timer, Never stops talking
- Posts: 2272
- Joined: Wed 08/04/04 2:00 am
- Location: Lakeland, Florida, USA
It depends on what you want. With my build, I had my logo put on white metal. If you were thinking of something wacky like what I did, then here's where you need to go:
www.gelgee.com and speak to Dale.
Here's a photo of my logo I designed of which they very accurately reproduced it, including tangerine detail, onto the white metal plate:
http://18watt.com/modules.php?set_album ... _album.php
www.gelgee.com and speak to Dale.
Here's a photo of my logo I designed of which they very accurately reproduced it, including tangerine detail, onto the white metal plate:
http://18watt.com/modules.php?set_album ... _album.php
Last edited by KingCrimson on Thu 01/27/05 1:16 pm, edited 1 time in total.
0 x