Re:
Posted: Sat 05/16/20 4:00 pm
Sounds like you need the huge cathode cap mod on the power tubes. Just use something like 1000uF, 2200uF or even higher, to nicely tighten up the amp.Alexo wrote: ↑Thu 02/14/08 12:11 pmI preferred fixed bias in this amp. Some might say that puts it farther away from being an 18 watt, but I think that sonically, it is closer. Don't ask me why, but 6V6's in cathode bias sound a little flabby and floppy to me, they tighten up really well in fixed bias; to me, the 18 sounds more tight than flabby/floppy.