best place to buy tubes?

Tube-specific discussions

Moderators: colossal, zaphod_phil, CurtissRobin

User avatar
Michael
Frequent poster
Frequent poster
Posts: 572
Joined: Thu 05/04/06 2:00 am
Location: Charleston
Contact:

Post by Michael »

NitroWoman wrote:http://mhuss.com/sgtoverdrive/
You won't get much from his website. Email him.
Is Mark the Sarge, or just supplying the web space to Terry?

Thanks,
Michael
0 x

Brewmaster
Occasional poster
Occasional poster
Posts: 200
Joined: Wed 09/06/06 2:00 am
Location: Out and About

Post by Brewmaster »

Lots of good guys mentioned so far but to add my personal favorite
I need to add Doug Preston from http://www.dougstubes.com. I have been dealing with him for close to 4 years with no issues.
0 x

User avatar
chris_deveau
Occasional poster
Occasional poster
Posts: 463
Joined: Mon 04/24/06 2:00 am
Location: MA

Post by chris_deveau »

Michael wrote:Is Mark the Sarge, or just supplying the web space to Terry?
Just supplying the space. Two seperate dudes.

-chris
0 x

kd
Verbose poster
Verbose poster
Posts: 1328
Joined: Tue 08/03/04 2:00 am
Location: Texas

Post by kd »

Here's another email address for Sarge(Terry): terry_kilgore2003@yahoo.com


Ken
0 x

User avatar
markh
Charter Member
Charter Member
Posts: 1503
Joined: Wed 12/18/02 2:00 am
Location: SE PA, USA
Contact:

Post by markh »

Michael wrote: Is Mark the Sarge, or just supplying the web space to Terry?
:lol: Now that's funny! We live on opposite sides of the US, but are kindred spirits (in tone if not writing style. :wink:) I host the sgtoverdrive page just so he has a place to park some pix and his e-mail address.

I'll add my endorsement (if the hosting is not endorsement enough), everything I've gotten from him has been great, except one bad Polam EL84, which he promptly replaced, and he gets all kinds of wierd and wonderful NOS.

--mark h
0 x

novemberrain
Verbose poster
Verbose poster
Posts: 1191
Joined: Sat 01/22/05 2:00 am

Post by novemberrain »

markh wrote:I'll add my endorsement (if the hosting is not endorsement enough), everything I've gotten from him has been great, and he gets all kinds of wierd and wonderful NOS.
Yeah it's mighty nice to be able to get NOS that was usually European or Eastern Bloc back in the good ol' days, I'll readily admit to not seein' ANY Polam, Mazda or those funky Russian military EL84s from my usual North American sources. I get "the usual suspects" like Telefunken, Mullard and Amperex, even Valvo every so often but no Polam or RFT.
0 x

dotfret
Frequent poster
Frequent poster
Posts: 922
Joined: Wed 09/29/04 2:00 am
Location: East Yorkshire

Post by dotfret »

Oy! Some of those Polam were made under Philips supervision and are GOOD THINGS - even if Polam only make light bulbs these days! So that's one side of the pond - this side we have watfordvalves.com who test a lot and don't sell rubbish, and a few older suppliers who "only sell wholesale" but can be persuaded to let people take things away for cash money. And TAD are with the good guys, even if they do make a profit!
0 x

mark0614
Occasional poster
Occasional poster
Posts: 266
Joined: Mon 02/02/04 2:00 am
Location: Sydney Australia

Post by mark0614 »

Regarding KCA, I have had NOS 12AX7 and 12AT7 tubes from them go noisy and fail prematurely. My advice is order them when you need them and don't buy them and stash them away as I did. This way you will take full advantage of the warranty period.

It is for these reasons that I don't buy NOS anymore. They are too expensive and from the experience mentioned above I have had better tube life from new production tubes.

Mind you, what comes around goes around. I recently was given eleven NOS 6550's (that does mean FREE!)

So I'm a happy camper!

Yours Sincerely

Mark Abbott
0 x

Post Reply