Donations
Baby will input switch
Moderators: colossal, zaphod_phil, CurtissRobin, Daviedawg, Graydon
-
cristianoepm
- Unrated
- Posts: 8
- Joined: Thu 03/20/25 1:49 pm
Baby will input switch
Hello, I would like to know if it is possible to keep the baby will with 1 input but install a switch so that the input works in parallel (2 triodes) or just in 1 triode. Thank you.
0 x
-
Bieworm
- Verbose Moderator
- Posts: 2653
- Joined: Mon 02/10/20 8:24 am
- Location: Belgium
Re: Baby will input switch
Ofcourse you can. Start drawing. You need to have a dpdt switch. Don’t forget that the unused triode needs an 1M grid load to ground too.
1 x
"THIS should be played at high volume..preferably in a residential area"
-
JMPGuitars
- Super Duper Admin
- Posts: 4403
- Joined: Tue 09/18/12 8:00 pm
- Location: South Central, MA
- Contact:
Re: Baby will input switch
It will be functionally the same as the schematic but with the switching that takes place on the single/parallel jacks moved to a DPDT switch. The two 1M resistors to ground are already present in the schematic. Of course, the single input jack should still ground the input pin when nothing is inserted.
1 x
'I installed a skylight in my apartment yesterday... The people who live above me are furious.' - Steven Wright
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Troubleshooting Basics:
Step 1: Remove and discard all JJ tubes.
Step 2: Highlighter test.
Step 3: Use a Voltage Chart from the downloads section to test your voltages.
Web Design: flashydragon.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
Modern Ground Schemes
Soldering Technique
B+ Voltage Reduction
Amplifier Tools & Parts Info
Troubleshooting Basics:
Step 1: Remove and discard all JJ tubes.
Step 2: Highlighter test.
Step 3: Use a Voltage Chart from the downloads section to test your voltages.
Web Design: flashydragon.com
Guitars / Amps / Effects: JMPGuitars.com
(anti)Social: Facebook · Instagram
Items for Sale
-
cristianoepm
- Unrated
- Posts: 8
- Joined: Thu 03/20/25 1:49 pm
-
cristianoepm
- Unrated
- Posts: 8
- Joined: Thu 03/20/25 1:49 pm
Re: Baby will input switch
Hello!!! Baby will finish!!!
I put a bright caps (100pf - 470pf - 1000pf)
And the another switch(1 or 2 triodes parallel) Thanks!!!
I put a bright caps (100pf - 470pf - 1000pf)
And the another switch(1 or 2 triodes parallel) Thanks!!!
You do not have the required permissions to view the files attached to this post.
3 x