Ac 15 build issue

[Tomass127]

951-UT-VOX-layout_v12Bsmall.pdf

I am working on an ac15 kit build and have run into a problem with the top boost channel. The first channel is an ef86 tube, it sounds great full and loud. The top boost channel is less than half the volume with not much low end or headroom. I have rechecked all of the component values and reflowed the solder joints for that channel. I attached the. Schematic that I'm using, is there anything that looks wrong, a resister value choking the amp?

[wmwelch55]

You will probably get more responses with a "real" schematic, not just a drawing. A drawing is fine for building the amp, but you need a schematic to analyze and easily see potential problems in the circuit.

Mike