Short sound clip w/ Telefunken´s
Moderators: colossal, zaphod_phil, CurtissRobin, Daviedawg, Graydon
-
Wannatone
- Frequent poster

- Posts: 622
- Joined: Wed 06/18/03 2:00 am
- Location: Germany
Short sound clip w/ Telefunken´s
Yesterday I just noodled some around and had my tape deck running.
It´s my 18 watt experimental chassis, kinda light version w/o trem. Preamp with Valvo ECC83´s, output Telefunken round plate EL84´s w/ diamond on bottom. OT is a Heyboer.
Converted ´54 Les Paul with an early Pat No. PU in the bridge position.
Marshall 4x12 slant basketveave cab with a pre-Rola G12M and three early Rola´s.
Adrian
It´s my 18 watt experimental chassis, kinda light version w/o trem. Preamp with Valvo ECC83´s, output Telefunken round plate EL84´s w/ diamond on bottom. OT is a Heyboer.
Converted ´54 Les Paul with an early Pat No. PU in the bridge position.
Marshall 4x12 slant basketveave cab with a pre-Rola G12M and three early Rola´s.
Adrian
0 x
- Gabi
- Senior Amp Tech

- Posts: 1753
- Joined: Fri 11/22/02 2:00 am
- Location: Arlington Heights, IL
- Contact:
-
Wannatone
- Frequent poster

- Posts: 622
- Joined: Wed 06/18/03 2:00 am
- Location: Germany
Gabi,
Thanks!
Well, I used a stereo cassette tape deck and two old Sennheiser MD221 mics with in-line impedance matching trannies.
The left mike was positioned close to the pre-Rola, just angeled from the side, some 45°. The other mike about 1 m from the cab.
I connected the tape deck with my soundcard and used the software that came with it (Creative Recorder / PlayCenter) to get wav files. Then normalized the amplitude of both channels. Converted the wav files to mp3 with a freeware converter called "dBpowerAMP Music Converter" that I downloaded from somewhere on the web. Very easy to use. Not at all sopisticated stuff. Just didn´t want to invest a penny. Glad to hear that it works for the purpose.
Actually, the ´66 JTM-100 Super PA sounds even more beefy in reality. It really moves some air.
The 18 watt is surprisingly loud thru the 4x12.
Adrian
Thanks!
Well, I used a stereo cassette tape deck and two old Sennheiser MD221 mics with in-line impedance matching trannies.
The left mike was positioned close to the pre-Rola, just angeled from the side, some 45°. The other mike about 1 m from the cab.
I connected the tape deck with my soundcard and used the software that came with it (Creative Recorder / PlayCenter) to get wav files. Then normalized the amplitude of both channels. Converted the wav files to mp3 with a freeware converter called "dBpowerAMP Music Converter" that I downloaded from somewhere on the web. Very easy to use. Not at all sopisticated stuff. Just didn´t want to invest a penny. Glad to hear that it works for the purpose.
Actually, the ´66 JTM-100 Super PA sounds even more beefy in reality. It really moves some air.
The 18 watt is surprisingly loud thru the 4x12.
Adrian
0 x
-
loverocker
- Senior Amp Tech

- Posts: 1677
- Joined: Thu 06/19/03 2:00 am
- Location: England
- Contact:
-
Wannatone
- Frequent poster

- Posts: 622
- Joined: Wed 06/18/03 2:00 am
- Location: Germany
-
loverocker
- Senior Amp Tech

- Posts: 1677
- Joined: Thu 06/19/03 2:00 am
- Location: England
- Contact:
-
Wannatone
- Frequent poster

- Posts: 622
- Joined: Wed 06/18/03 2:00 am
- Location: Germany
Yeah, and plays great, and sounds great.
For those who are interested in more ´66 JTM-100 Super PA:
http://vintageamps.com/PlexiPalaceUBBcg ... 762#000000
Btw, the BW cab I played the 18 watt through is the upper right one (see "that´s where she lives").
Well, I´ve checked some more speakers. A pair of 50´s Jensen P12N´s in an open back cab gives a damned cutting through lead tone, and VERY loud. Almost too trebly, but not icepicking.
The other test was with the ´63 Blue´s of my AC30 (check the clip).
Well, I DO need a 2x12 cab with Blue´s!!
Does anybody have a cab drawing of the 2x12?
Adrian
Adrian
For those who are interested in more ´66 JTM-100 Super PA:
http://vintageamps.com/PlexiPalaceUBBcg ... 762#000000
Btw, the BW cab I played the 18 watt through is the upper right one (see "that´s where she lives").
Well, I´ve checked some more speakers. A pair of 50´s Jensen P12N´s in an open back cab gives a damned cutting through lead tone, and VERY loud. Almost too trebly, but not icepicking.
The other test was with the ´63 Blue´s of my AC30 (check the clip).
Well, I DO need a 2x12 cab with Blue´s!!
Does anybody have a cab drawing of the 2x12?
Adrian
Adrian
0 x
- zaphod_phil
- Builder, Admin

- Posts: 15208
- Joined: Wed 03/19/03 2:00 am
- Location: YYZ
- Gabi
- Senior Amp Tech

- Posts: 1753
- Joined: Fri 11/22/02 2:00 am
- Location: Arlington Heights, IL
- Contact:
