Can't find appropriate schematic

Double-Bubble! Place for discussing the 36W version...

Moderators: colossal, zaphod_phil, CurtissRobin, Daviedawg, Graydon

Post Reply
dynaman
Newbie
Newbie
Posts: 31
Joined: Mon 02/21/05 2:00 am
Location: Livonia, MI

Can't find appropriate schematic

Post by dynaman »

Is there a 36W non-master TMB schem available? Thanks.
0 x

dynaman
Newbie
Newbie
Posts: 31
Joined: Mon 02/21/05 2:00 am
Location: Livonia, MI

Post by dynaman »

Big secret or something? Or is the info so obvious that my dumb question doesn't justify a response?
0 x

ChrisU
Occasional poster
Occasional poster
Posts: 252
Joined: Tue 04/25/06 2:00 am
Location: Norfolk, England.

Post by ChrisU »

Just leave out the MV pot, connect the tone wiper to the 22n cap with a 1M resistor to ground.
0 x

what_wires
Verbose poster
Verbose poster
Posts: 1282
Joined: Wed 08/11/04 2:00 am
Location: O-HI-O
Contact:

Post by what_wires »

ChrisU wrote:Just leave out the MV pot, connect the tone wiper to the 22n cap with a 1M resistor to ground.
Gee Whiz Chris.... Now that you've told him, you're going to have to kill him... :roll:
0 x

ChrisU
Occasional poster
Occasional poster
Posts: 252
Joined: Tue 04/25/06 2:00 am
Location: Norfolk, England.

Post by ChrisU »

Oh dear- I didn't realise that actually is on the BIG SECRETS list. :roll:
0 x

what_wires
Verbose poster
Verbose poster
Posts: 1282
Joined: Wed 08/11/04 2:00 am
Location: O-HI-O
Contact:

Post by what_wires »

Sure... just because he has a clearance doesn't mean he has a need to know...
0 x

dynaman
Newbie
Newbie
Posts: 31
Joined: Mon 02/21/05 2:00 am
Location: Livonia, MI

Post by dynaman »

Ahhh, thank you sir.
0 x

User avatar
PinkPanther
Unrated
Posts: 11
Joined: Fri 12/01/06 2:00 am
Location: Vaasa,Finland

Post by PinkPanther »

Thanks guys,that solved my problem too :lol:

Niko
0 x

Post Reply