Page 4 of 4
Posted: Fri 03/30/07 7:55 pm
by user669
To create the channel for the piping I use a normal thickness ".125" saw blade. It is much easier in my option to make mistakes doing this with a router.
I will have plans showing how I make the dominator at some point. I hope this helps everyone!
Posted: Sun 04/15/07 1:50 am
by user669
I am posting photos of the cabinet build on my site if anyone is interested. It is half way done. I know that some were wondering how I attached the front panels and I think these photos will give some insight on how its done.
Re: WATKINS DOMINATOR CABINET
Posted: Tue 04/28/20 6:52 pm
by bennyk
Gentlemen,
I know this thread has been long buried, but I was wondering if anyone has the Dominator cabinet plan files that Mr.Mike from Amp Cabinet Company posted way back when? Not much info on these unless you want to buy a repro amp.I don't see them at the Wattkins amp site either. Would be nice if they were archived. Definitely a long shot, but I thought I'd ask. Thanks.
Benny
Re: WATKINS DOMINATOR CABINET
Posted: Sat 09/03/22 8:10 pm
by crgfrench
Here are the Plans
Screen Shot 2022-09-03 at 8.34.48 PM.png
Screen Shot 2022-09-03 at 8.35.10 PM.png
Screen Shot 2022-09-03 at 8.35.34 PM.png