Page 1 of 1
Please summarize changes needed to use 2 x EL34
Posted: Fri 02/08/13 8:36 am
by markk916
Hey Ya'll... thank you for your help in advance... Can anyone please help me identify which changes should be made to accommodate a pair of cathode biased EL34's instead of the Quad of EL84's? I am using a standard set of 36 watt Transformers from Heyboer.. I have read the threads... a lot of info is around... just a lot of confusing bits of information though... so, any helpful point by point suggestions would be super cool...
Zaphod Phil... Anyone... Help please..
Thanks again...
Re: Please summarize changes needed to use 2 x EL34
Posted: Fri 02/08/13 8:52 am
by markk916
Oh,... I should add that I have broken the channels back out to be separate.... Like a standard 18 watt TMB... with no NFB loop/switch... Just in case that matters... Thank you...
Re: Please summarize changes needed to use 2 x EL34
Posted: Tue 03/05/13 7:02 pm
by menger
Look over at the weber forum at the phat ass amp there building, it a lite IIb with different powertubes I did a few myself with kk66 el34 6550 just a few resistors in the pi is all mark
Re: Please summarize changes needed to use 2 x EL34
Posted: Thu 03/07/13 11:15 am
by markk916
Do you have a link to something that shows those changes... I can't seem to find what you have mentioned... Thank you...
Re: Please summarize changes needed to use 2 x EL34
Posted: Thu 03/07/13 4:59 pm
by scottva59
Here is my post from the "hear it" section, it covers the Phat Ass 16 (6v6) or 26 (EL34) versions. Let us know how it turns out!
Scott
http://www.18watt.com/forums/viewtopic.php?f=13&t=23052" onclick="window.open(this.href);return false;