Troubleshooting
Posted: Thu 04/29/21 10:25 pm
I'm still trying to chase down some minor issues with noise coming from my 18 watt build. I've come to the conclusion that I probably need an oscilloscope and signal generator to do it properly.
In researching entry level scopes, I came across the Hantek DS02D10 which has a built-in arbitrary waveform generator. Based on what I've read and looking at the specs, it seems to be adequate but I wanted to get some opinions here first. The whole setup being under $300 puts it within my budget.
Here's a link to it on Amazon:
https://www.amazon.com/Hantek-DSO2D10-B ... 628&sr=8-4
And a link to the info on the manufacturer's web site:
http://hantek.com/products/detail/17182
I'd appreciate any comments or recommendations.
Mark
In researching entry level scopes, I came across the Hantek DS02D10 which has a built-in arbitrary waveform generator. Based on what I've read and looking at the specs, it seems to be adequate but I wanted to get some opinions here first. The whole setup being under $300 puts it within my budget.
Here's a link to it on Amazon:
https://www.amazon.com/Hantek-DSO2D10-B ... 628&sr=8-4
And a link to the info on the manufacturer's web site:
http://hantek.com/products/detail/17182
I'd appreciate any comments or recommendations.
Mark