Page 1 of 1
36 watt power section layout
Posted: Tue 06/28/05 5:35 pm
by chriswu101
Anyone care to confirm this layout? This is using the Heyboer trannies. Hope this helps some of you that are building the 36 watter.
Chris
Posted: Tue 06/28/05 9:07 pm
by twangbanger
THANKS Rob
Posted: Tue 06/28/05 11:06 pm
by markd
Chris,
Perhaps having both the fuse and the power switch on the hot leg of the AC cord would be better. The way you are showing it either the fuse or the power switch is on the neutral leg.
If you have access to a DPST switch you could also use that to break both the hot and neutral legs at the on switch. That gives you some extra protection if you are plugging into a miswired outlet. Not something you have to do, but it's cheap insurance.
hth,markd
Posted: Sat 07/02/05 6:26 pm
by NewGuitar
That looks pretty good. I also am running both leads from the 110v power through the main switch and have the fuse on the hot side before the switch. (Some one already suggested this to me.)
What's the purpose of the voltage divider with the resistors across the heater circuit?