Who's selling parts and kits?

General Tech Discussion - Anything amp-ish goes!

Moderators: colossal, zaphod_phil, CurtissRobin, Daviedawg, Graydon

Post Reply
Mayhawk

Who's selling parts and kits?

Post by Mayhawk »

Hi,

I'm new here....................GREAT SITE!

Who here sells kits and parts? I've never built an amp, but would like to, but do not want to read every single thread to see who to buy the parts from.

Thanks!

Bill H.
0 x

Plexi
Charter Member
Charter Member
Posts: 4305
Joined: Fri 03/14/03 2:00 am
Location: Ky. USA

Post by Plexi »

Well since the site went down, I think some files are missing..also your post brings up something we probably need to do..well when Gabi can find the time,Or maybe Graydon or Mark,might update some of this..

But i copied and pasted this from our old yahoo site.. Its the parts list that mark made. Its has part numbers etc.. I'll post it below,Maybe gabi can just copy and paste it into the Parts file. But that seems is what would be good to have. We have more members now offering board kits or different parts. Most that have been on here know who to get them from,but some one just joining might not know what or where to source them. So hopefully we could have a file, with parts list, and have everyone post if they sell bords,kits, cabs speakers,whaterver. Most of us keep extra parts for these amps. But Graydon Sells the Transformers,chassis faceplates, and a complete Kit. Probably the easiest way to go if your new to building. Anyway..here is the parts list Mark made up..Oh and if the prices are a bit different.. its because the list was made up a couple years ago..lol But looks like some have gone down.
His pic of this was alot better, and had a grid sepearting the parts and all
So might be better for Gabi to just copy it from the Yahoo site.
Richie


The 18 Watt Parts List


18 Watt - General Parts
Item P/N Qty Price (USD) Vendor
Strain relief grommet
.437 hole 534-733 2 $0.08 Mouser
Fuse Holder
1/4x1.25" fuses 504-S-8001-1 1 $1.19 Mouser
tube sockets, 9-pin ceramic/gold 1.125" 6 $6.00 Angela
Input jack - Cliff 1/4" 4 $4.00 Sprung
On/off Switch 103-0132 2 $1.33 Mouser
500k Audio pot 31VJ505 4 $1.25 Mouser
2M Linear Pot 31VA602 1 $1.25 Mouser
1k Linear Pot 31VA301 1 $1.25 Mouser
Resistors $8.32 Mouser
Capacitors $28.80 Mouser/Angela
G10 fiberglass board (priced per inch) 10 $0.50 Hoffman
Nylon stand-offs 561-K6.25 4 $0.14 Mouser
CapCan clamp for 16/32 $2.00 Angela

Power Tranny 1 Varies Heyboer or EMC
Output tranny 1 Varies Heyboer or EMC
10" speaker wC10RS or SS 2 $24.00 Weber
Chassis & plexi panel 1 $90.00 Graydon Stuckey
Cabinet 1 Varies See FAQ
grill cloth 62grill 1 $45.00 Sprung
Gold Handle gldhndle 1 $14.50 Time Electronics
Gold Logo 6" gldlgo 1 $30.00 Sprung
Nylon stand-offs

Subtotal $749.98


Note: The numbering used below now does finally match all the numbers on the PedalMonkey schematic! 18 Watt - Capacitors
All capacitors 600v unless otherwise specified
OD = Orange Drop
Number Value Mouser P/N Qty Price (USD)
C1 1uF/150v Atom 75-TVA-1400 1 $0.81
C2 16uF/475v Atom 75-TVA-1803.1 0* $2.59
C3 30uF/500v Atom 75-TVA-1907 0* $3.00
C4 16uF/475v Atom 75-TVA-1803.1 1 $2.59
C5,C12,C13,C15 .0047uF OD 75-715P600V0.0047 4 $0.47
C6, 16, 17, 18 .01uF OD 75-715P600V0.01 4 $0.59
C7 .047uF OD 75-715P600V0.047 1 $0.77
C8, 9, 10 .01uF/100v disc 140-100Z5-103Z 3 $0.10
C11 25uF/50v Atom 75-TVA-1306 1 $0.81
C14 470pF 140-102S6-471J 1 $0.23
C19 50uF/50v Atom 75-TVA-1308 1 $0.82
CAP CAN* 16+32/450v cap can 1 $17.00


Note: The numbering used below does NOT match all the numbers on the PedalMonkey schematic! 18 Watt - Resistors
All resistors 1/2 watt unless otherwise specified
Number Value Mouser P/N Qty Price (USD)
R1 100k 30BJ500-100k 1 $0.22
R2 820 30BJ500-820 1 $0.22
R3, 4 1M 30BJ500-1M 2 $0.32
R5 1.5k 2W 588-OY-1.5k 1 $0.93
R6 8.2k 3W 588-23J-8.2k 1 $2.15
R7 100k 30BJ500-100k 1 $0.22
R8 1M 30BJ500-1M 1 $0.32
R9 470k 30BJ500-470k 1 $0.22
R10 2.2M 30BJ500-2.2m 1 $0.32
R11 100k 30BJ500-100k 1 $0.22
R12 200k 30BJ500-200k 1 $0.22
R13 820 30BJ500-820 1 $0.22
R14 820 30BJ500-820 1 $0.22
R15, 16 470k 30BJ500-470k 2 $0.22
R17 56k 30BJ500-56k 1 $0.22
R18, 19 100k 30BJ500-100k 2 $0.22
R20 125 5W 71-CW5-125 1 $0.46
R21, 22 8.2k 30BJ500-8.2k 2 $0.22
R23, 24 470k 30BJ500-470k 2 $0.22
R25 100 30BJ500-100 1 $0.22
R26 1M 30BJ500-1M 1 $0.32
R27, 28 68k 30BJ500-68k 1 $0.22
$8.32


Other Useful Parts (Mouser)
Item P/N Price (USD) Quantity Use
Neon Light 5/16"red 607-2150A1 $2.23 1 Indicator
Diodes 1N4007 625-1N4007 $0.05 * Bias, SS Rectification

Terminal Strip 3 Lug 158-1003 $0.29 * connections
Terminal Strip 4 Lug 158-1004 $0.37 * connections
Terminal Strip 5 Lug 158-1005 $0.48 * connections
Terminal Strip 6 Lug 158-1006 $0.57 * connections
Eyelets 1/8" x .156 534-45 $0.04 * connections
Ground Lug #10 534-905-10 $0.11 * connections
Ground Lug #6 534-7315 $0.13 * connections
Spacer 1/2" #6 561-K6.50 $0.08 6 Standoffs for boards
Staking tool 534-1721 $20.71 1 Eyelet staking tool
Nylon Bushing 3/8" 561-MP3754 $0.11 * Use in Place of...
Nylon Bushing 1/2" 561-MP5005 $0.13 * Grommets
Knobs (chicken head) 5164-2300 $0.55 * Controls
Power 8', SJT18/3 173-73102 $3.59 1 Power Cord
Strain Relief 561-MP6P34 $0.17 1
Fuse Holder 441-FH001 $1.39 1
* These vary from none to several depending on how you build your amp.
0 x

User avatar
Ian
Frequent poster
Frequent poster
Posts: 544
Joined: Fri 05/23/03 2:00 am
Location: London

Post by Ian »

Hi Bill,

As you’re new here (welcome!), you may not be aware that the whole site crashed about 3 weeks ago, and it was down for around 10 days. When Gabbi (site Admin) restored it, many of the reference files had been lost/corrupted, inc. hundreds of Gallery pictures showing dozens of cloned 18W amps in various stages of construction, plus a number of original 1960’s 18W Marshall’s, plus various schematics & layout drawings etc.

Some of that stuff has now been restored, but some is still waiting in the “pipelineâ€
0 x

User avatar
Gabi
Senior Amp Tech
Senior Amp Tech
Posts: 1753
Joined: Fri 11/22/02 2:00 am
Location: Arlington Heights, IL
Contact:

Post by Gabi »

Thanks Richie reminding me of that list... I completely forgot about it.

However, I included that one "18 Watt BOM (Mark Huss)" and also "Aaron's 18 Watt BOM ", in the Main Schematics and Layouts section of the DOWNLOADS area. Check them out here:

http://www.18watt.com/modules.php?name= ... load&cid=1

The files are in Excell format.

Hope this helps,
Gabi.
0 x

Post Reply